Selecting the Receive Mode
Select the receive mode that suits your intended use beforehand (Deciding Which Fax Receive Mode to Use).
|
NOTE
|
|
If you previously selected <Set Up Later> on the fax setup screen (Registering the Fax Number and Unit Name), press
  <Fax Settings> <Fax Setup Guide> to display the fax setup screen. |
1
Press <Next>.
The screen shown here is displayed after the unit name has been registered (Registering the Fax Number and Unit Name).
2
Select the receive mode that suits your intended use.
Use 
/
to select <Yes> or <No>, and press 
to select the receive mode.
/ to select <Yes> or <No>, and press to select the receive mode.NOTE:
If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, <DRPD> is also available for the receiving mode. Receiving Faxes
To set the receive mode to <Auto>
To set the receive mode to <Fax/Tel Auto Switch>
To set the receive mode to <Answering Machine>
To set the receive mode to <Manual>
3
Press <Apply>.
»
Continue to Connecting the Telephone Line