![]() |
|
All the settings about the printer are listed with short descriptions. Default settings are marked with a dagger (
![]() |
NOTE
|
Asterisks (*)Settings marked with an asterisk (*) are only available for the MF8580Cdw.
Priority of settingsSettings that are specified in an application or on the printer driver will override those specified on the machine. The settings described in this section are especially useful if you are printing on an operating system such as UNIX on which the printer drivers for the machine are not available.
Availability of settingsAll the printer settings described in this section, except for <Paper Size Override> (Paper Size Override), are only available for PCL printing. Specifying these settings is unnecessary, for example, when you print using the UFRII LT printer driver.
|
1
![]() |
Off
![]() On |
NOTE
|
<Default Paper Size> and <Default Paper Type> cannot be specified separately. Specify the paper size in the <Default Paper Size> screen, and then specify the paper type in the <Default Paper Type> screen.
|
LTR
![]() LGL STMT EXEC No. 10 (COM10) Monarch DL ISO-C5
A4
A5
B5
|
Plain 1 (16 lb Bond-19 lb Bond [60-74 g/m²])
Plain 2 (19 lb Bond-22 lb Bond [70-84 g/m²]) ![]() Plain 3 (20 lb Bond-23 lb Bond [75-90 g/m²])
Recycled
Color Heavy 1 (23 lb Bond-31 lb Bond [86-119 g/m²]) Heavy 2 (32 lb Bond-34 lb Bond [120-128 g/m²]) Heavy 3 (35 lb Bond-60 lb Cover [129-163 g/m²]) Coated 1 (27 lb Bond-29 lb Bond [100-110 g/m²]) Coated 2 (32 lb Bond-34 lb Bond [120-130 g/m²]) Coated 3 (58 lb Cover-60 lb Cover [155-165 g/m²]) Coated 4 (78 lb Cover-81 lb Cover [210-220 g/m²]) Transparency Labels Envelope |
NOTE
|
If you select an envelope (<No. 10 (COM10)>, <Monarch>, <DL>, or <ISO-C5>) as the paper size in <Default Paper Size>, only <Envelope> is available as a paper type.
|
Off
![]() On |
Yellow
17 Levels
Magenta
17 Levels
Cyan
17 Levels
Black
17 Levels
|
Yellow
High
17 Levels
Medium
17 Levels
Low
17 Levels
Magenta
High
17 Levels
Medium
17 Levels
Low
17 Levels
Cyan
High
17 Levels
Medium
17 Levels
Low
17 Levels
Black
High
17 Levels
Medium
17 Levels
Low
17 Levels
|
NOTE
|
The settings specified for <Toner Density (Fine Adjust)> are disabled when <Toner Save> is enabled.
|
Off
![]() On |
IMPORTANT
|
When this setting is enabled, fine lines and portions with lighter print density may become blurred.
|
High 1
![]() High 2
|
Mode 1
![]() Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
|
NOTE
|
When <Error Diffusion> is enabled for <Halftones> (Halftones), <Mode 1>, <Mode 2>, <Mode 3>, and <Mode 4> apply the same effect on printouts as <Mode 6> does.
|
Resolution Priority
![]() Gradation Priority
|
![]() |
![]() |
![]() |
![]() |
Long Edge
![]() Short Edge
|
NOTE
|
You cannot create a binding margin with this setting alone. Use this setting in combination with the <Gutter> setting to set the binding margin for the selected binding position.
|
-1.90 to ±0
![]() ![]() |
IMPORTANT
|
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be printed.
|
-2.00 to ±0
![]() ![]() |
IMPORTANT
|
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be printed.
|
NOTE
|
You can specify this setting in combination with the <Offset Long Edge (Front)>, <Offset Short Edge (Back)>, and <Offset Long Edge (Back)>. By specifying all four settings, for example, the print position is shifted as shown in the illustration below.
![]() If the offset settings are specified in combination with the <Gutter> setting, the specified values are added together.
|
-2.00 to ±0
![]() ![]() |
IMPORTANT
|
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be printed.
|
-2.00 to ±0
![]() ![]() |
IMPORTANT
|
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be printed.
|
-2.00 to ±0
![]() ![]() |
IMPORTANT
|
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be printed.
|
Off
![]() On |
NOTE
|
Error skip bypasses errors in print data, so the document may not be printed correctly.
You can manually perform error skip.
![]() ![]() ![]() ![]() ![]() |
5 to 15
![]() |
NOTE
|
Provide the machine with enough time to receive all the print data from the computer, especially when printing large amounts of data. If you specify a time period that is too short, the machine may not receive all the print data in time for printing.
|
Auto (Color/B&W)
![]() Color
Black and White
|
Gradation
Off
![]() Smooth 1
Smooth 2
Apply to Graphics
Off
On
![]() Apply to Images
Off
On
![]() |
Output
![]() Display Error |
Off
![]() On |
Portrait
![]() Landscape
|
0
![]() |
4.00 to 12.00
![]() |
0.44 to 10.00
![]() |
5 to 60
![]() |
|
Off
![]() On |
Millimeters
Inches
![]() |
3 to 8 1/2
![]() ![]() |
5 to 14
![]() ![]() |
Yes
No
![]() |
Off
![]() On |
Error Diffusion
Off
![]() On
Resolution/Gradation
Text
Resolution
![]() Gradation
Graphics
Resolution
Gradation
![]() Image
Resolution
Gradation
![]() |
Text
sRGB
![]() Gamma 1.5
Gamma 1.8
Gamma 2.4
Graphics
sRGB
![]() Gamma 1.5
Gamma 1.8
Gamma 2.4
Image
sRGB
![]() Gamma 1.5
Gamma 1.8
Gamma 2.4
|
NOTE
|
This setting is enabled only when <CMS> is selected in <CMS (Matching)/Gamma>.
|
Text
Normal
![]() Photo Graphics
Normal
![]() Photo
Image
Normal
Photo
![]() |
NOTE
|
This setting is enabled only when <CMS> is selected in <CMS (Matching)/Gamma>.
|
Text
Perceptual
Saturation
![]() Colorimetric
Graphics
Perceptual
![]() Saturation
Colorimetric
Image
Perceptual
![]() Saturation
Colorimetric
|
NOTE
|
This setting is enabled only when <CMS> is selected in <CMS (Matching)/Gamma>.
|
Text
Off
On
![]() Graphics
Off
On
![]() Image
Off
On
![]() |
Printer
![]() Host |
Text
Gamma
CMS
![]() Graphics
Gamma
CMS
![]() Image
Gamma
CMS
![]() |
Text
1.0
1.4
![]() 1.8
2.2
Graphics
1.0
1.4
![]() 1.8
2.2
Image
1.0
1.4
![]() 1.8
2.2
|
NOTE
|
This setting is enabled only when <Gamma> is selected in <CMS (Matching)/Gamma>.
|
Advanced Smoothing
Off
Smooth 1
![]() Smooth 2
Apply to Graphics
Off
![]() On
Apply to Text
Off
On
![]() |