Adjustment/Maintenance
|
|
All the settings about adjustment and maintenance are listed with short descriptions. Default settings are marked with a dagger ( ![](./images/book_images/b_dagger.gif) ).
|
NOTE
|
Asterisks (*)
Settings marked with an asterisk (*) are only available when the optional paper drawer (drawer 2) is attached.
|
Auto Adjust Gradation
Full Adjust Quick Adjust Adjust Copy Image
|
Auto Correction Settings
Select whether to automatically perform a quick gradation adjustment or color shift correction after the machine is turned ON.
Auto Adjust Image Regularly![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Select when to make an automatic quick gradation adjustment. If <On> is selected, quick adjustment is automatically made after the machine is turned ON. If <Off> is selected, a quick adjustment is made when the first printing is completed after the machine is turned ON. You can also perform this adjustment manually (
Quick Adjust).
Off ![](./images/book_images/b_dagger.gif)
On
|
Correct Print Color Mismatch When Main Power is ON![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Select whether to automatically perform the Correct Print Color Mismatch function after the machine is turned ON. You can also perform this adjustment manually (
Correcting "Print Color Mismatch").
Off ![](./images/book_images/b_dagger.gif) On
|
Correct Print Color Mismatch
Black Text Processing for Color
Feeder
Seven Levels
Platen Glass
Seven Levels
|
Special Processing
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
Special Paper Processing
When printing on the back side of printed paper, rough paper, or envelopes, the print results may be improved by adjusting the following settings.
Manual Back Side Settings (for 2-Sided Only)![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
If printouts on the back side of printed paper are too light, select <On>. You can specify this setting separately for each paper source.
Multi-Purpose Tray
Off ![](./images/book_images/b_dagger.gif)
On
Drawer 1
Off ![](./images/book_images/b_dagger.gif)
On
Drawer 2*
Off ![](./images/book_images/b_dagger.gif)
On
|
Rough Paper Settings![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
When printing on rough paper, especially when color images are printed too light, select <On>. You can specify the settings separately for each paper source.
Multi-Purpose Tray
Off ![](./images/book_images/b_dagger.gif)
On
Drawer 1
Off ![](./images/book_images/b_dagger.gif)
On
Drawer 2*
Off ![](./images/book_images/b_dagger.gif)
On
|
Envelope Cling Prevention![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
If envelope flaps cling to the envelope bodies when printing, select <On>.
Off ![](./images/book_images/b_dagger.gif)
On
|
Envelope Switch![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Adjust this setting if envelope printouts are light, or envelopes do not feed smoothly.
Envelope 1 ![](./images/book_images/b_dagger.gif)
Envelope 2
|
<Envelope 1>
Prints on envelopes with normal fixing power.
<Envelope 2>
Prints on envelopes with fixing power stronger than <Envelope 1>.
Special Mode P![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
If the printed paper curls, select <On>.
Off ![](./images/book_images/b_dagger.gif)
On
|
Clean Fixing Unit
Clean the fixing unit after a toner cartridge is replaced or if black streaks appear on printouts.
Fixing Unit
Clean ITB
Clean the transfer belt inside the machine to prevent the print quality from deteriorating.
Transfer Belt
Clean Feeder
Clean the feeder rollers if documents become dirty after being fed through the feeder.
Feeder