Available Settings Information Table with the Import All Function

The following cases may be possible for the Import All function.
Case A:
Importing all to your machine (Restoring the settings information to your machine for backups)
Case B:
Importing all to the same model machine (imageRUNNER ADVANCE C3330i/C3325i series)
Case C:
Importing all to the different model machine that supports the Import All function
IMPORTANT
In case C, the Import All function may not be enabled according to the model for importing. For more information, contact your local authorized Canon dealer.
The following settings information is available with the Import function in each case:
For more information, see the appropriate table. Settings/Registration items are grouped by purpose and stored in separate directories. If the Import All function can be used to import all of a primary setting's subsidiary settings, only the primary setting is listed in the table below.
IMPORTANT
In the following cases, even if you use the Import All function, the settings information may not be imported, or the value may be changed into the closest value.
There are no optional products or functions that use the set value.
The set value is not valid.

Settings/Registration Basic Information

Setting Information
Case A
Case B
Case C
Preferences
Paper Settings
Paper Settings
-
Paper Size Group for Auto Recog. in Drawer
-
A5R/STMTR Paper Selection
-
Register Favorite Paper (Multi-Purpose Tray)
-
Multi-Purpose Tray Defaults
-
Register Custom Size
-
Display Settings
Default Screen after Startup/Restoration
Default Screen (Status Monitor/Cancel)
Display Fax Function
Store Location Display Settings
Switch Language/Keyboard
Use Keyboard Shift Lock Feature
Display Remaining Paper Message
No. of Copies/Job Duration Status
Notify to Clean Original Scanning Area
Paper Type Selection Screen Priority
Switch Millimeter/Inch Entry
ID/User Name Display On/Off
Display Remaining Toner Error Message
IP Address Display Settings
Setting Information
Case A
Case B
Case C
Preferences
Timer/Energy Settings
Date/Time Settings
Time Format
Quick Startup Settings for Main Power
Auto Reset Time
Restrict Auto Reset Time
Function After Auto Reset
Auto Sleep Time
Sleep Mode Energy Use
Auto Sleep Weekly Timer
Sleep Mode Exit Time Settings
Setting Information
Case A
Case B
Case C
Preferences
Network
Confirm Network Connection Set. Changes
TCP/IP Settings
IPv4 Settings
Use IPv4
IP Address Settings
IP Address
-
-
Subnet Mask
Gateway Address
DHCP
Auto IP
DHCP Option Settings
IPv6 Settings
Use IPv6
Stateless Address Settings
Manual Address Settings
-
-
Use DHCPv6
Only Retrieve Stateful Address Prefix
DNS Settings
DNS Server Address Settings
DNS Host/Domain Name Settings
-
-
DNS Dynamic Update Settings
mDNS SettingsUse mDNS/mDNS Name
Computer Name/Workgroup Name Settings
-
-
WINS Settings
LPD Print Settings
RAW Print Settings
SNTP Settings
FTP Print Settings
Use UTF-8 to Display Name of FTP Print Job
WSD Settings
Use FTP PASV Mode
IPP Print Settings
Multicast Discovery Settings
Use HTTP
Proxy Settings
Confirm Dept. ID PIN
IPSec Settings
Use Network Link Scan
AppleTalk Settings
-
-
SNMP Settings
Format Host Resources MIB to RFC2790
Dedicated Port Settings
Use Spool Function
Waiting Time for Connection at Startup
Ethernet Driver Settings
IEEE 802.1X Settings
Firewall Settings
Use AirPrint
Device Position Information Settings
-
-
Setting Information
Case A
Case B
Case C
Preferences
External Interface
USB Settings
Accessibility
Key Repetition Settings
Reversed Display (Color)
Adjustment/Maintenance
Adjust Image Quality
Correct Density
Full Color Printing Vividness Settings
-
-
Fine Adjust Zoom
-
-
Adjust Toner Volume Used for Color Printing
-
-
Fill Area Image Adjustment Mode
-
Adjust Action
Time Until Stapling Starts in Stapler Mode
Setting Information
Case A
Case B
Case C
Function Settings
Common
Paper Feed Settings
Paper Drawer Auto Selection On/Off
-
Switch Feed Method
-
Suspended Job Timeout
Paper Output Settings
Output Tray Settings*
-
-
Use Optional Output Tray
-
-
Offset Jobs
Job Separator Between Jobs
Job Separator Between Copies
Print Settings
Print Priority
Text/Photo Prty. When Recog as B&W by ACS
Output Report Default Settings
Register Characters for Page No./Watermark
Copy Set Numbering Option Settings
-
Secure Watermark/Document Scan Lock
Forced Secure Watermark/Document Scan Lock
Printer Driver Secure Watermark
Adjust Background/Character Contrast
Relative Contrast
-
-
Standard Value Set.
-
-
Latent Area Density
-
-
Adjust TL Code
Dot Size
-
-
Dot Density
Scan Settings
Feeder Jam Recovery Method
-
Scanner Noise Settings
-
LTRR/STMT Original Selection
-
Remote Scan Gamma Value
-
Auto Online
Auto Offline
Generate File
Image Quality Level for Compact
OCR (Text Searchable) Settings
Trace & Smooth Settings
-
OOXML Settings
Include Background Images in Word File
Specify Minimum PDF Version
Format PDF to PDF/A
Optimize PDF for Web
256-bit AES Settings for Encrypted PDF
Rights Management Server Settings
Document Scan Lock Operational Settings
Set Authentication Method
* If the number of the output tray of the machine for exporting is different from that of the destination machine for importing, the priority orders of the output destinations may not correspond. In this case, paper is output according to the priority order specified on the machine for importing.
Setting Information
Case A
Case B
Case C
Function Settings
Copy
Auto Collate
-
Auto Recognize Original Orientation
Select Color Settings for Copy
Send
Common Settings
E-Mail/I-Fax Settings
Register Unit Name
Communication Settings
E-Mail Address
-
-
SMTP Server
POP Server
POP Login Name
-
-
POP Password
-
-
POP Interval
Allow SSL
Authentication Settings
Confirm SSL Certificate for SMTP TX
Confirm SSL Certificate for POP RX
Maximum Data Size for Sending
Default Subject
Specify Authentication User Dest. to Reply
Set Authentication User Destination to Sender
Allow Unregistered Users to Send E-Mail
Full Mode TX Timeout
Print MDN/DSN upon Receipt
Use Send via Server
Allow MDN Not via Server
Restrict TX Destination Domain
Auto Complete for Entering E-Mail Addresses
Fax Settings
Default Screen
Change Default Settings
Register Options Shortcuts
Register Sender Name (TTI)
Use Auth. User Name as Sender Name
ECM TX
Set Pause Time
Auto Redial
Check Dial Tone Before Sending
Fax TX Report
Fax Activity Report
Set Line
Line 1 to Line 2
Register Unit Telephone Number
-
-
Register Unit Name
-
-
Select Line Type
Edit Line Name for Select Line Screen
Default Address List When Selecting Line
Select TX Line
TX Start Speed
PIN Code Access
Confirm Entered Fax Number
Allow Fax Driver TX
Confirm Before Sending When Fax Dest. Incl.
Restrict Seq. Broadcast When Fax Dest. Incl.
Remote Fax TX Settings
Receive/Forward
Common Settings
Print on Both Sides
Select Drawer
Reduce Fax RX Size
2 on 1 Log
Print RX Page Footer
Interrupt and Print RX Jobs
-
Handle Files with Forwarding Errors
Set Fax/I-Fax Inbox
Always Send Notice for RX Errors
Fax Settings
Store/Access Files
Common Settings
Limit Box PIN to 7 Digits/Restrict Access
Mail Box Settings
Box Security Settings
Network Settings
Memory Media Settings
Secure Print
Simple Authentication Settings
Only Allow Encrypted Print Jobs
Setting Information
Case A
Case B
Case C
Set Destination
Change Default Display of Address Book
Address Book PIN
Manage Address Book Access Numbers
Include Pswd. When Exporting Address Book
Register LDAP Server
-
Auto Search When Using LDAP Server
Register/Edit LDAP Search Conditions
-
Acquire Remote Address Book
Acquire Address Book
Remote Address Book Server Address
Communication Timeout
Fax TX Line Auto Select Adjustment
Setting Information
Case A
Case B
Case C
Management Settings
User Management
Authentication Management
Device Management
Device Information Settings
-
-
Device Information Distribution Settings
Register Destinations
-
Set Auto Distribution
-
Restrict Receiving Device Information
Restrict Receiving for Each Function
Report Settings
Set MEAP Authentication
Use MEAP Auth. When Receive
Display Job Status Before Authentication
Restrict Access to Other User Jobs
Display Job Log
Save Audit Log
Audit Log Collection*
-
Store Key Operation Log
License/Other
Message Board/Support Link
Remote Operation Settings
Use ACCESS MANAGEMENT SYSTEM
Data Management
Import/Export
Restrict Import/Export from Web Service
Back Up/Restore Settings*
Backup Location Settings
Auto Backup Settings
Delete Existing Data Settings
Security Settings
*These settings can only be specified from the Remote UI.

Box Settings

Setting Information
Case A
Case B
Case C
Function Settings
Receive/Forward
Common Settings
Set Fax/I-Fax Inbox
Set/Register Confidential Fax Inboxes
Memory RX Inbox PIN
Store/Access Files
Mail Box Settings
Set/Register Mail Boxes

Department ID Management

Setting Information
Case A
Case B
Case C
Management Settings
User Management
System Manager/Contact Person Information Settings
Department ID Management
Register PIN

Key Settings*1*2

Setting Information
Key Pair
Key Pair (Device Certificate)
-
-
*1
Only algorithms that can be imported with the Remote UI are supported by batch importing.
*2
The key pair is exported in the PKCS#12 format.

Certificate/Certificate Revocation List (CRL) Settings *1*2

Setting Information
CA Certificate
Certificate Revocation List (CRL)
*1
Only algorithms that can be imported with the Remote UI are supported by batch importing.
*2
The key pair is exported in the PKCS#12 format.

Main Menu Settings

Setting Information
Case A
Case B
Case C
Main Menu Settings
Setting File

Favorite Settings

Setting Information
Case A
Case B
Case C
Function Settings
Copy
Register/Edit Favorite Settings
-
Change Default Settings
-
Register Options Shortcuts
-
Send
Common Settings
Fax Settings
Store/Access Files
Common Settings
-
Copy Basic Features Screen
Color Balance (Options)
-
Access Stored Files
Mail Box (Print)
Color Balance (Options)
-

Address Book

Setting Information
Case A
Case B
Case C
Set Destination
Register Destinations
Rename Address List
Register One-Touch

Forwarding Settings

Setting Information
Case A
Case B
Case C
Function Settings
Receive/Forward
Common Settings
*
*
*
*If an address registered in the Remote Address Book is specified as the forwarding destination, the forwarding destination information of that address is not imported. However, if the exporting machine and importing machine use the same Remote Address Book, the importing machine can use the same forwarding settings. For information on the Remote Address Book, see "Specifying Destinations Using the Address Book (Remote)."

Quick Menu Settings

Setting Information
Case A
Case B
Case C
Quick Menu Settings
Button File
-

Workflow Composer Settings

Setting Information
Flow Data File
Operating Setting File
*
When the user management settings of an Advanced Space are imported, they are imported as authentication user management settings.

Authentication User Management*

Setting Information
Authentication Management
User Management
Role Management
Group Management
System Managment Service
Application Authentication Information
*
When the user management settings of an Advanced Space are imported, they are imported as authentication user management settings.

Personal Setting Information

Setting Information
MEAP User Setting Information
Password information used for encrypted PDF
-
User name and password information used for SMTP Authentication
-
User name and password information used for the Rights Management Server
-
User name and password used for LDAP server authentication
-
User name and password used for File TX/Browsing authentication
-
User name and password used for the Personal Folder authentication
-

MEAP Application Setting Information

Setting Information
Case A
Case B
Case C
MEAP Application Setting Information
Data

Paper Type Management Settings

Setting Information
Case A
Case B
Case C
Preferences
Paper Settings
Paper Type Management Settings

Web Access Settings

Setting Information
Case A
Case B
Case C
Web Access Settings
Favorites
Settings
IMPORTANT
If favorites are registered as the shortcut buttons or [Default Screen after Startup/Restoration] settings in the target machine for importing, the registered information is changed when importing the setting information of Web Access settings.
12HF-1UK