Setting the Receiving Machine

NOTE
If you want to restore device information to what it was before it was updated, only the data of the very last update is available to be restored. While receiving and updating device information, the screen indicating that the settings are being updated appears. Operations on this machine cannot be performed until the update completes.

Restricting the Reception of Device Information

Receiving from machines other than imageRUNNER ADVANCE C3330i/C3325i is restricted.

Press

(Settings/Registration).

Press [Management Settings] → [Device Management] → [Device Information Distribution Settings].

Press [Restrict Receiving Device Information] for <Receiving Settings> → [On] → [OK].

If you do not want to restrict the reception of device information, press [Off].

Press [OK].

Restoring Device Information

You can restore device information to what it was before it was updated. This is useful when you have accidentally updated the device information.

Press

(Settings/Registration).

Press [Management Settings] → [Device Management] → [Device Information Distribution Settings].

Press [Restore Data] for <Receiving Settings>.

Select the information to restore → press [Start].

IMPORTANT
You cannot restore the settings of Workflow Composer to what they were before the device information was updated. If you do not restore [Settings/Reg. Value] and [Address Book] at the same time, [URL Send Settings] in [Set Fax/I-Fax Inbox] may be erased.

Press [Yes].

Press [OK] → [OK].

Restricting the Type of Information That Is Updated

You can set whether the machine receives and updates the delivered device information.

Press

(Settings/Registration).

Press [Management Settings] → [Device Management] → [Device Information Distribution Settings].

Press [Restrict Receiving for Each Function] for <Receiving Settings> → specify each setting → press [OK].

Press [On] for an item to set the machine to not receive and update that device information.

NOTE
Before setting <Settings/Registration Value>, <Dept. ID>, or <Address Book> to 'Off', it is necessary to set a default key in [Preferences] (Settings/Registration). (See "Setting the Key Pair Used With SSL Encrypted Communications.")

Press [OK].

NOTE
Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in (Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "Main Power and Energy Saver Key."

NOTE

Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in

(Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "Main Power and Energy Saver Key."