Job Build

This mode enables you to scan multiple originals with different size, 1-sided/2-sided, density, or original type settings, and send them as a single optimal document.

NOTE
For information on the optional products required to use this function, see "Optional Products Required for Each Function." If the originals are scanned with the platen glass, the Job Build mode is always used, regardless of these settings.

Press [Scan and Send].

Specify the destination → press [Options] → [Job Build].

Press [Close].

Press

(Start).

NOTE
To cancel scanning, press [Cancel] or (Stop).

When scanning is complete, place your next batch of originals → press

(Start).

If you want to change the settings, change them before pressing

(Start).

You can press [Change Settings] to change the following settings:

Select Color: Switching the Colour Mode

Scan Size: Specifying/Registering Scan Sizes

2-Sided Original: 2-Sided Original

Density: Adjusting Density Manually

Original Type: Selecting the Original Type

[2-Sided Original] is available only if the feeder is attached to the machine.

After the last batch of originals is scanned, press [Start Sending].

IMPORTANT
You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance. If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete. The maximum number of pages that can be sent at one time is 999. When using [Job Build], a message appears to ask you if you want to send the job when 999 pages of originals have been scanned. If you select to send the job, the scanned 999 pages are sent. If you cancel the job, the scanned pages are not sent.

IMPORTANT

You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance.

If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.

The maximum number of pages that can be sent at one time is 999. When using [Job Build], a message appears to ask you if you want to send the job when 999 pages of originals have been scanned. If you select to send the job, the scanned 999 pages are sent. If you cancel the job, the scanned pages are not sent.

NOTE
If you place different size originals into the feeder, set [Different Size Originals]. (See "Different Size Originals.") When scanning and sending 1-sided originals and 2-sided originals together, if the first document you scan is a 2-sided original, set [2-Sided Original]. When scanning a 1-sided original, disable the [2-Sided Original] setting in [Change Settings].