Job Build

This mode enables you to scan multiple originals with different colour, 1-sided/2-sided, density, or original type settings, etc., and save them as a single file.

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

As an example, the procedure for selecting memory media as the storage location is explained in this section.

NOTE
If the originals are scanned with the platen glass, the Job Build mode is always used, regardless of these settings.

Press [Scan and Store] → [Memory Media].

Select the memory media → select the destination folder → press [Scan].

Press [Options] → [Job Build] → [Close].

Press

(Start).

NOTE
To cancel scanning, press [Cancel] or (Stop).

When scanning is complete, place your next batch of originals → press

(Start).

If you want to change the settings, change them before pressing

(Start).

Select Color: Switching the Colour Mode

Scan Size: Specifying/Registering Scan Sizes

2-Sided Original: 2-Sided Original

Density: Adjusting Density Manually

Original Type: Selecting the Original Type

NOTE
[2-Sided Original] can be set when the feeder is attached. [Scan Size] can only be changed when saving to the Advanced Space of another imageRUNNER ADVANCE machine on the network or memory media.

After the last batch of originals is scanned, press [Start Storing].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions." If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete. You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance.

IMPORTANT

For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."

If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.

You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary scan settings in advance.

NOTE
If you want to place different size originals in the feeder, set [Different Size Originals]. (See "Different Size Originals.") If you want to scan one-sided and two-sided originals and store them as two-sided documents, divide the originals into one-sided and two-sided batches. For example, if the first batch consists of two-sided originals, set [2-Sided Original]. Thereafter, you have to manually set or cancel [2-Sided Original] for each batch of originals that you scan.

NOTE

If you want to place different size originals in the feeder, set [Different Size Originals]. (See "Different Size Originals.")

If you want to scan one-sided and two-sided originals and store them as two-sided documents, divide the originals into one-sided and two-sided batches. For example, if the first batch consists of two-sided originals, set [2-Sided Original]. Thereafter, you have to manually set or cancel [2-Sided Original] for each batch of originals that you scan.