Configuring Ethernet Settings

Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can be used without changing the defaults (Ethernet Driver Settings), but you can change these settings to suit your network environment.

Tap <Menu> in the <Home> Screen.

Tap <Network Settings>.

If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press

. Logging on to the Machine

Select <Ethernet Driver Settings>

<Auto Detect>.

Select whether to configure Ethernet settings automatically or manually.

Configuring Ethernet settings automatically

Tap <On>. The machine detects and automatically sets the communication mode and the Ethernet type that can be used.

Configuring Ethernet settings manually

1	Tap <Off>.
2	Select the communication mode. Tap <Communication Mode> tap <Half Duplex> or <Full Duplex>. <Half Duplex> Alternately sends and receives communication data. Select when the machine is connected to a networking device using half duplex. <Full Duplex> Simultaneously sends and receives communication data. Use this setting for most environments.
3	Select the Ethernet type. Tap <Ethernet Type> tap <10BASE-T> or <100BASE-TX>.
4	Tap <Apply>.

Restart the machine.

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

Changing the Maximum Transmission Unit

Setting a Wait Time for Connecting to a Network