Configuring Scan Settings (Sending E-mail, Sending & Receiving I-Faxes)

Before configuring the machine for scanning to e-mail, check the setup flow shown below.
 
 
Make sure that the machine and the computer are correctly connected.
 
 
Make sure that you have the following information:
The IP address of the machine. Viewing Network Settings
An e-mail address to be registered as a destination.
Information about the e-mail server, including the SMTP server name, port numbers, whether authentication is required, and the user name and password for authentication.
For more information about the e-mail server settings, contact your Internet service provider or Network Administrator.
 
 
Make sure that the computer meets the following system requirements for the Send Setting Tool(sending e-mail):
Operating system
Windows Vista/7/8/Server 2003/Server 2008/Server 2012
Web browser
Microsoft Internet Explorer 7.0 or later
Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at least 256 colors
Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
 
 
Set the machine configuration.
Sending e-mail
Sending & Receiving I-Fax
0SCJ-07S