Flow of Copy Operations
This section describes the basic flow of copy operations.
1.
Place your originals.
If you placed your originals on the platen glass, gently close the feeder/platen cover.
If the automatically selected paper size is different from the paper size you want, press [Select Paper] → select the required paper size. (See "Paper Selection.")
|
NOTE
|
|
For information on placing your originals, see "Placing Originals."
If [Auto Collate] is set to 'On', the Collate or Offset Collate mode is automatically set when you place your originals in the feeder. (See "Enabling Auto Collating.")
|
2.
Press [Copy].
If the desired function is not displayed on the Main Menu screen, press [Show All].
3.
Set the desired copy modes.
You can set the colour mode, paper type, and copy ratio on the Regular Copy Basic Features screen.
If you press [Options], you can select useful copy modes. You can also set combinations of copy modes.
Press 
or 
to display the desired mode.
or to display the desired mode.For more information on setting each mode, see the corresponding section.
4.
Press 
- 
(numeric keys) to enter the desired copy quantity (1 to 999).
- (numeric keys) to enter the desired copy quantity (1 to 999).If you make a mistake when entering values, press 
(Clear) → enter the correct value.
(Clear) → enter the correct value.|
IMPORTANT
|
|
You cannot change the copy quantity while the machine is copying.
|
|
NOTE
|
|
The number of copies which can be set varies according to the copy modes you have set.
|
5.
Press 
(Start).
(Start).If the following screen appears, press [Start Copying] after the originals are scanned.
If you are placing your originals on the platen glass, press (Start) to scan each original.
(Start) to scan each original.
You can cancel the copy job or interrupt to make priority copies even while the machine is printing.
|
NOTE
|
|
To cancel copying, press
 (Stop). For information on cancelling copying, see "Cancelling a Copy Job."For information on interrupting a copy job to make priority copies, see "Interrupt Mode."
For information on starting to copy the next original while a previous original is printing, see "Reserved Copying."
|
|
NOTE
|
|
We recommend you read the following topics before using the Copy function:
Main Power and Control Power (See "Main Power and Control Panel Power.")
Entering Characters from the Touch Panel Display (See "Entering Characters from the Touch Panel Display.")
Routine maintenance (See "Routine Maintenance" in the Basic Operation Guide.)
If you are using a login service, log in and out of the service before and after operating the machine.
If you are using Department ID Management with the Card Reader-C1/Copy Card Reader-F1, see "Card Reader-C1/Copy Card Reader-F1."
If you are using Department ID Management, see "Entering the Department ID and PIN."
If you are performing user authentication using the SSO-H login service, see "Login Service."
|