Main Power and Control Panel Power

The machine is provided with two power switches, a main power switch and a control panel power switch.

How to Turn ON the Main Power

This section explains how to turn ON the main power.

Make sure that the power plug is firmly inserted into the power outlet.

WARNING
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.

Turn ON the main power.

Open the main power switch cover.

Press the main power switch to the "I" side.

Close the main power switch cover.

The main power indicator on the control panel lights when you turn ON the main power switch.

Various screens appear when system software is loading.

If you are using a login service, log in using the procedure for the login service you are using.

NOTE
You can select which functions to display on the screen when turning ON the main power, according to the [Default Screen at Startup] in [Preferences] (Settings/Registration). (See "Default Screen at Startup.") If this machine is connected to a powered off Macintosh computer by USB cable, the computer may turn on automatically when this machine does. In this case, disconnect the USB cable from the machine. You may also be able to solve this problem by using a USB hub between the machine and the computer. The response of the buttons and keys may not be optimal immediately after you turn ON the main power of the machine. If you are using Department ID Management with the Card Reader-C1/Copy Card Reader-F1, see "Card Reader-C1/Copy Card Reader-F1." If you are using Department ID Management, see "Entering the Department ID and PIN." If you are using SSO-H, see "Login Service."

NOTE

You can select which functions to display on the screen when turning ON the main power, according to the [Default Screen at Startup] in [Preferences] (Settings/Registration). (See "Default Screen at Startup.")

If this machine is connected to a powered off Macintosh computer by USB cable, the computer may turn on automatically when this machine does. In this case, disconnect the USB cable from the machine. You may also be able to solve this problem by using a USB hub between the machine and the computer.

The response of the buttons and keys may not be optimal immediately after you turn ON the main power of the machine.

If you are using Department ID Management with the Card Reader-C1/Copy Card Reader-F1, see "Card Reader-C1/Copy Card Reader-F1."

If you are using Department ID Management, see "Entering the Department ID and PIN."

If you are using SSO-H, see "Login Service."

Control Panel Power Switch

If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy consumption. Press the control panel power switch to cancel the Sleep mode and resume normal machine operations.

Shutting Down the Machine

This machine performs a procedure to protect memory when the machine is shut down.
This enables the machine to be shut down safely, even if there are any jobs being processed, or a MEAP application is running.

Turn OFF the main power.

Open the main power switch cover.

Press the main power switch to the "

" side.

Close the main power switch cover.

IMPORTANT
Do not turn the main power OFF while using the Fax/I-Fax function. Fax and I-fax documents cannot be sent and received when the main power is turned OFF. The machine may continue to operate during the shutdown process. Do not unplug the power cord until the main power indicator of the machine is OFF. If the main power is turned OFF during scanning or printing, a paper jam may occur.

IMPORTANT
If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator is turned OFF before turning ON the main power.

NOTE
The machine can receive and print documents from a personal computer when it is in the Sleep mode. I-fax and fax documents can also be received while the machine is in the Sleep mode.