Cause
|
The application cannot be started because there are no redistributable modules included in the application.
|
Remedy
|
Contact the developer of the application.
|
Cause
|
The application cannot be started because it includes an applet, and the number of applets that can be started on the system would exceed the limit (nine applets) if the application was started.
|
Remedy
|
Stop an application running on the system which includes an applet, in order to reduce the number of applets running on the system, and then restart the application.
|
Cause
|
A license file is necessary to start the application (the license file has not been installed).
|
Remedy
|
Install the license file, and then restart the application.
|
Cause
|
The application cannot be started because system resources required to start the application are unable to be reserved.
|
Remedy
|
Stop another application, and then restart this application. It may be able to start this time.
|
Cause
|
The application cannot be started because the applet name the application is trying to register in the Applet Viewer Service differs from the applet name included in the application file.
|
Remedy
|
Since it is necessary to make corrections to the application, contact the developer of the application.
|
Cause
|
The application cannot be uninstalled because the license file for the application still exists inside the machine.
|
Remedy
|
Uninstall the application after deleting the license on the [License Management] page.
|
Cause
|
An error has occurred for some reason. Refer to <Error Details> for details.
|
Remedy
|
If countermeasures for the error are still not clear from <Error Details>, contact your local authorized Canon dealer.
|