|
Cause
|
The application cannot be started because there are no redistributable modules included in the application.
|
|
Remedy
|
Contact the developer of the application.
|
|
Cause
|
The application cannot be started because it includes an applet, and the number of applets that can be started on the system would exceed the limit (nine applets) if the application was started.
|
|
Remedy
|
Stop an application running on the system which includes an applet, in order to reduce the number of applets running on the system, and then restart the application.
|
|
Cause
|
The application cannot be started because system resources required to start the application may not be able to be reserved.
NOTE: The resources which can not be reserved may be one of the following:
Memory
Thread
Socket
File descriptor
|
|
Remedy
|
Stop another application, and then try restarting this application. It may be able to start this time.
|
|
Cause
|
The application cannot be started because the applet name the application is trying to register in the Applet Viewer Service differs from the applet name included in the application file.
|
|
Remedy
|
Since it is necessary to make corrections to the application, contact the developer of the application.
|
|
Cause
|
The currently set login service, a login service that will be enabled after restarting the machine, and the Default Authentication login service cannot be uninstalled.
|
|
Remedy
|
Do not uninstall the currently set login service, a login service that will be enabled after restarting the machine, or the Default Authentication login service. To uninstall the currently set login service, uninstall it after restarting the machine.
|
|
Cause
|
The application file does not exist in the specified path, or the file path is incorrect.
|
|
Remedy
|
Specify the file path correctly.
|
|
Cause
|
A manifest does not exist for the file specified as the application.
|
|
Remedy
|
This application could not be installed. Contact the developer of the application.
|
|
Cause
|
The license file does not exist in the specified path, or the file path is incorrect.
|
|
Remedy
|
Specify the file path correctly.
|
|
Cause
|
The contents of the file specified as an application file are incorrect, or information is missing.
|
|
Remedy
|
This application cannot be installed. Check the file. If there are no problems, contact your local authorized Canon dealer.
|
|
Cause
|
The contents of the file specified as a license file are incorrect, or information is missing.
|
|
Remedy
|
This license file cannot be installed. Check the file. If there are no problems, contact your local authorized Canon dealer.
|
|
Cause1
|
A valid code signature cannot be confirmed in the application.
|
|
Remedy
|
Perform the correct code signing for the application.
|
|
Cause2
|
The file may have been modified.
|
|
Remedy
|
Contact the developer of the application.
|
|
Cause
|
The application cannot be installed because the specified license file does not correspond to the specified application.
|
|
Remedy
|
Specify a license file which corresponds to the application.
|
|
Cause
|
The specified file is not a system application. This application cannot be installed from this [Enhanced Sys. App] page.
|
|
Remedy
|
Install from the [Install] page.
|
|
Cause
|
The license file cannot be installed because the license file ID information log will exceed the maximum number of entries.
|
|
Remedy
|
Perform the installation again after erasing events in the license file ID log on the [License File Log] page.
|
|
Cause
|
A license file which is already installed cannot be installed again. The specified license file has already been installed.
|
|
Remedy
|
The specified license file cannot be installed. Specify another license file.
|
|
Cause
|
You cannot install the application unless you specify a corresponding license file with the application.
|
|
Remedy
|
When specifying an application to install, also specify a corresponding license.
|
|
Cause1
|
<Inaccurate information> in the application cannot be recognized as correct information.
|
|
Remedy
|
Contact your local authorized Canon dealer.
|
|
Cause2
|
If the <Inaccurate information> is the MEAP Specifications, the MEAP Specifications of the application and of the machine do not match.
|
|
Remedy
|
Contact your local authorized Canon dealer.
|
|
Cause
|
The application cannot be installed because required information is not included in the application.
|
|
Remedy
|
Check the file. If there are no problems, contact your local authorized Canon dealer to see if there is any <Missing information>.
|
|
Cause
|
The application can only be installed in certain machine models. It cannot be installed in this machine.
|
|
Remedy
|
Specify an application which supports the machine.
|
|
Cause
|
In the license file, there is serial number information of machines in which the license file can be installed. The application you have specified cannot be installed, because your machine's serial number is not found in the serial number information in this license file.
|
|
Remedy
|
Specify a license file whose serial number information includes the serial number of your machine.
|
|
Cause
|
The application cannot be installed because the display area of an applet included in the application exceeds the area that can be displayed on the panel of the machine.
|
|
Remedy
|
This application cannot be installed. Install an application that includes only applets that fit within the maximum display area of the machine.
|
|
Cause
|
The specified file is a file for updating an application which is already installed. It is necessary to stop the application which is to be updated before updating.
|
|
Remedy
|
Stop the application that you want to update, and then perform the update again.
|
|
Cause
|
Although the file is an update file for the login service that is currently set, it cannot update a login service that has already started.
|
|
Remedy
|
To install the update file for the login service, start another login service, and then install the update file.
|
|
Cause
|
The application cannot be installed because there is not enough space left on the memory.
|
|
Remedy
|
Uninstall unnecessary applications to free up memory.
|
|
Cause
|
The cancel button was pressed when installation could not be cancelled. Installation has been successfully completed.
|
|
Remedy
|
Uninstall the application.
|
|
Cause
|
The installation could not be completed because it conflicted with a system shutdown.
|
|
Remedy
|
Perform the installation again after the machine has restarted.
|
|
Cause
|
An error has occurred for some reason. Refer to <Error Details> for details.
|
|
Remedy
|
If countermeasures for the error are still not clear from <Error Details>, contact your local authorized Canon dealer.
|