Setting Manual Delivery
You can set to manually deliver device information.
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Management Settings] → [Device Management] → [Device Information Delivery Settings].
3.
Press [Manual Delivery] under <Transmitting Settings>.
4.
Specify the various settings → press [Next].
Press [On] for an item to deliver that data.
If you press [On] for [Settings/Registration Value], set <Network Settings>. You can press [Include] → [OK] to deliver the network settings.
5.
Select the destination → press [Start Manual Delivery].
If you want to cancel the delivery, press [Stop].
When delivery is complete, confirm the delivery results displayed in the <Status> column on the Manual Delivery screen.
|
NOTE
|
|
Even if you press [Stop] on the delivery in progress screen, delivery will not be cancelled for machines to which information has already been delivered. Delivery to the next selected machine will be cancelled.
|
6.
Press [OK] → [OK].
|
IMPORTANT
|
|
When delivering device information, the following machines will not update their information:
|
|
Machines which are processing a send job
|
|
Machines importing or exporting data via the Remote UI
|
|
The client machine which is receiving device information from another host machine will not update the address book.
|
|
The client machine which is performing a print job will not update the printer settings.
|