Output Report
You can print a list of the Send or Receive settings that have been specified from the Settings/Registration screen. This is useful for checking the details of the settings.
|
NOTE
|
|
Reports can only be printed if A3, A4, or A4R (plain, recycled, or colour paper) paper is loaded in the paper sources whose settings in Other in [Paper Drawer Auto Selection On/Off] are set to 'On'. However, if you set [Consider Paper Type] to 'On' for Copy in [Paper Drawer Auto Selection On/Off], you cannot print from paper sources set to use colour paper. (See "Enabling Paper Drawer Auto Selection.")
The following two types of User Data Lists are available:
Send/Receive: Prints all information related to the Send function stored from the Settings/Registration screen.
Fax: Prints all information related to the Fax function stored from the Settings/Registration screen.
For an example of the User's Data List, see "User's Data List."
|
1.
Press 
.
.2.
Press [Function Settings] → [Send] → [Output Report].
Printing the User Data List for Receive/Forward:
Press [TX/RX User Data List] → press [Yes].
Printing the User Data List for Fax:
Press [Fax User Data List] → press [Yes].