Using the USB Port

You can specify the settings related to the USB port.
Using the Machine as a USB Device
Using the MEAP Driver for USB Input Device Connections
Using the MEAP Driver for USB External Storage

Using the Machine as a USB Device

To "Settings/Registration Table."
1.
Press .
2.
Press [Preferences] → [External Interface] → [USB Settings].
3.
Press [Use USB Device] → [On] → [OK].
Press [Off] to not use the USB device.
Using the MEAP Driver for USB Input Device Connections
To "Settings/Registration Table."
1.
Press .
2.
Press [Preferences] → [External Interface] → [USB Settings].
3.
Press [Use MEAP Driver for USB Input Device] → [On] → [OK].
Press [Off] to not use the MEAP driver for USB input device.
IMPORTANT
Depending on the type of MEAP application that uses device such as a keyboard or card reader, you may need to set this setting to 'On'. To check whether you need to set this setting to 'On', see the manual for the MEAP application you are using, or contact your local authorized Canon dealer.

Using the MEAP Driver for USB External Storage

To "Settings/Registration Table."
1.
Press .
2.
Press [Preferences] → [External Interface] → [USB Settings].
3.
Press [Use MEAP Driver for External USB Device] → [On] → [OK].
Press [Off] to not use the MEAP driver for USB external storage device.
IMPORTANT
Depending on the type of MEAP application that uses USB external memory device, you may need to set this setting to 'On'. To check whether you need to set this setting to 'On', see the manual for the MEAP application you are using. Or, contact your local authorized Canon dealer.
NOTE
The Remote UI is enabled only after you restart the machine (the main power switch is turned OFF, and then back ON). For instruction on restarting (turning the main power switch OFF and then ON) the machine, see "Main Power and Control Panel Power."