Various Scan Settings
Specifying/Registering Scan Sizes
You can manually specify a scan size when scanning originals that cannot be detected using the [Auto] mode, such as transparencies, or originals smaller than A5 size. You can also store frequently used scan size settings.
Specifying the Scan Size Selecting a Paper Size
You can specify a paper size for scanning.
If you want to scan an A3 original with an image that extends all the way to the edges without the periphery of the original being cut off, place the original on the platen glass → press [A3+].
Specifying the Scan Size Manually
You can enter a custom X and Y value to specify the size for scanning.
2-Sided Original*
You can scan and send both sides of a two-sided original placed in the feeder.
Book → 2 Pages
This mode enables you to scan and send facing pages in books as individual pages.
Different Size Originals
This mode enables you to scan different size originals (A3 and A4) together.
Changing the Zoom Ratio
This mode enables you to enlarge or reduce the size of your original when sending. You can also set the machine to automatically adjust the zoom ratio.
Preset Zoom
You can use preset zoom ratios to enlarge or reduce standard size originals to other standard sizes.
Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. The same zoom ratio is used for the horizontal and vertical axes.
Auto Zoom
You can automatically enlarge or reduce an original to a specified paper size. The same zoom ratio is used for the horizontal and vertical axes.
Erase Frame
This mode enables you to erase the shadows, lines, and binding marks that appear when scanning various types of originals.
The following three options are available:
Erase Original Frame
This mode erases the dark borders and frame lines that appear around the scanned image if the original is smaller than the specified paper size. You can also use this mode to create a blank border around the edge of the scanned image.
Erase Book Frame
This mode erases the dark borders, as well as centre and contour lines that appear when you scan an original such as a magazine or a book.
Erase Binding
This mode erases the shadows that appear on scanned images from binding holes on originals.
Job Build
This mode enables you to scan originals that are too many to be placed at once, by dividing them into multiple batches. You can use both the feeder and the platen glass to scan.
*: For information on the optional products required to use this function, see "Optional Products Required for Each Function."