Checking the Status of Consumables

You can check the status of consumables, such as detailed paper information and the remaining amount of toner and staples. You can also register/set the paper type to load in a paper drawer.
1.
Press .
2.
Press [Consumables].
To check the details of paper loaded in the machine:
To check other information:
To register/set a paper type:
To check the details of paper loaded in the machine:
Select the paper source you want to check →press [Details].
You can press to enlarge the displayed list.
Press [OK].
To check other information:
Check the percentage of memory usage, amount of waste toner, and the remaining amount of toner and staples.
NOTE
The table below indicates the remaining amount of consumables.
Display
Remaining amount of toner
[OK]
100 to 11%
[Low]
10 to 1%
[Empty]
0%
Display
Remaining amount of staples
[OK]
100 to 26%
[Low]
25 to 1%
[Empty]
0%
To register/set a paper type:
Press [Reg.].
Select an item to register/set → register/set the paper type.
[Paper Settings]:
Sets the paper type to load by selecting a paper source.
[Paper Type Management Settings]:
Registers a user-defined paper type by entering a name.
NOTE
For more information on paper settings, see "Registering the Paper Type for a Paper Source."
For more information on paper type management, see "Registering/Editing Custom Paper Types."
Press [OK].