Changing the Default Settings for Send
You can change the default settings for Scan and Send.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
Changing the Default Settings for Send
1.
Press 
.
.To register changes to the default settings, you must set the Send mode in advance.
2.
Press [Function Settings] → [Send] → [Common Settings].
3.
Press [Change Default Settings].
4.
Press [Register].
The current send settings are set as the default settings.
5.
Press [Yes].
6.
Press [Close]
Initializing the Default Settings for Send
1.
Press .
.2.
Press [Function Settings] → [Send] → [Common Settings].
3.
Press [Change Default Settings].
4.
Press [Initialize].
5.
Press [Yes].