Enhanced System Application(增強型系統應用程式)頁面

The currently set login service(當前設定的登入服務)
Login services that will be enabled after the device is restarted(重新啟動裝置後啟用的登入服務)
Default Authentication login services(Default Authentication登入服務)
The currently set login service can be uninstalled after the device is restarted.>(重新啟動裝置後可以解除安裝當前設定的登入服務。)
<Cannot start this application because there is no Distributable Software in the application. Get a Distributable Software.>(由於應用程式中沒有「可發佈的軟體」,因此無法啟動該應用程式。請獲得「可發佈的軟體」。)
原因
由於應用程式中未包含可重新發佈的模塊,因此無法啟動應用程式。
解決辦法
請聯絡應用程式的開發者。
<Cannot start this application because the number of bootable applets has exceeded the limit. Start this application after stopping other applications.>(由於可啟動的Applet的數量已超過限制,因此無法啟動該應用程式。停止其他應用程式後啟動該應用程式。)
原因
由於該應用程式包括一個Applet,且若啟動該應用程式,系統中可以啟動的Applet數量將超過限制(九個Applet),所以無法啟動該應用程式。
解決辦法
為了減少系統上正在運行的Applet的數量,請在系統上停止運行包括Applet的應用程式,然後重新啟動該應用程式。
<Cannot start this application because system resources required to start the application may not be available. <Resources>>(由於啟動應用程式所需的系統資源可能不可用,因此不能啟動該應用程式。<資源>)
原因
無法啟動應用程式,因為可能無法保留啟動應用程式所需的系統資源。
注意︰無法保留的資源可能是以下其中一項:
Memory(記憶體)
Thread(執行緒)
Socket(通訊端)
File descriptor(檔案描述元)
解決辦法
停止其他應用程式,然後嘗試重新啟動該應用程式。這次可能會啟動。
<The name listed in the file for the application and the applet name to register with Applet Viewer Service are different. Check the file.>(應用程式檔案中所列的名稱與要使用Applet Viewer Service註冊的Applet名稱不一致。請檢查檔案。)
原因
由於應用程式試圖在Applet Viewer Service中註冊的Applet名稱與應用程式檔案中包含的Applet名稱不一致,因此無法啟動應用程式。
解決辦法
由於需要對應用程式進行修正,請聯絡應用程式的開發者。
<The following login services cannot be uninstalled:(無法解除安裝以下登入服務:)
The currently set login service(當前設定的登入服務)
Login services that will be enabled after the device is restarted(重新啟動裝置後啟用的登入服務)
Default Authentication login services(Default Authentication登入服務)
The currently set login service can be uninstalled after the device is restarted.>(重新啟動裝置後可以解除安裝當前設定的登入服務。)
原因
無法解除安裝當前設定的登入服務、重新啟動本機器後啟用的登入服務和Default Authentication登入服務。
解決辦法
請勿解除安裝當前設定的登入服務、重新啟動本機器後啟用的登入服務或Default Authentication登入服務。若要解除安裝當前設定的登入服務,請先重新啟動本機器再解除安裝。
<The file for the application to install does not exist or the file path is incorrect. Try to specify the path again.>(要安裝的應用程式檔案不存在或檔案路徑錯誤。請嘗試重新指定路徑。)
原因
應用程式檔案不在指定的路徑中,或檔案路徑不正確。
解決辦法
指定正確的檔案路徑。
<The manifest is not listed in the specified file. Check the file.>[指定的檔案中未列出清單(MANIFEST)。請檢查檔案。]
原因
指定為應用程式的檔案中未包含清單(MANIFEST)。
解決辦法
無法安裝該應用程式。請聯絡應用程式的開發者。
<The file for the license to install does not exist or the file path is incorrect. Try to specify the path again.>(要安裝的許可協議檔案不存在或檔案路徑錯誤。請嘗試重新指定路徑。)
原因
許可協議檔案不在指定的路徑中,或檔案路徑不正確。
解決辦法
指定正確的檔案路徑。
<The contents of the file for the application to install are incorrect or information is missing. Check the file.>(要安裝的應用程式檔案的內容不正確或資訊缺失。請檢查檔案。)
原因
指定為應用程式檔案的內容不正確或資訊缺失。
解決辦法
無法安裝該應用程式。請檢查檔案。若檔案沒有問題,請聯絡當地的授權Canon經銷商。
<The contents of the file for the license to install are incorrect or information is missing. Check the file.>(要安裝的許可協議檔案的內容不正確或資訊缺失。請檢查檔案。)
原因
指定為許可協議檔案的內容不正確或資訊缺失。
解決辦法
無法安裝該許可協議檔案。請檢查檔案。若檔案沒有問題,請聯絡當地的授權Canon經銷商。
<Cannot install this application because a code signing has not been confirmed to be valid. Get a valid code signing.>(由於代碼簽名尚未被確認為有效,因此無法安裝該應用程式。請獲得有效的代碼簽名。)
原因1
無法在應用程式中確認有效的代碼簽名。
解決辦法
執行正確的應用程式代碼簽名。
原因2
檔案可能已被修改。
解決辦法
請聯絡應用程式的開發者。
<Cannot install this license because the specified application and license do not correspond. Try to specify a path for the license file again.>(由於指定的應用程式與許可協議不一致,因此無法安裝該許可協議。請嘗試重新指定許可協議檔案的路徑。)
原因
由於指定的許可協議檔案不適用於指定的應用程式,因此無法安裝應用程式。
解決辦法
指定適用於應用程式的許可協議檔案。
<The specified file is not system application. Check the file.>(指定的檔案不是系統應用程式。請檢查檔案。)
原因
指定的檔案不是系統應用程式。無法從此[Enhanced Sys. App](增強型系統應用程式)頁面安裝該應用程式。
解決辦法
從[Install](安裝)頁面安裝。
<Cannot install this license because the number of license file ID logs that can be saved has exceeded the limit. Contact your service representative.>(由於可以保存的許可協議檔案ID日誌的數目超出限制,因此無法安裝該許可協議。請聯絡技術服務人員。)
原因
由於許可協議檔案ID資訊日誌已超過條目的最大數量,因此無法安裝許可協議檔案。
解決辦法
在[License File Log](許可協議檔案日誌)頁面上刪除許可協議檔案ID日誌中的事件後,再重新執行安裝。
<Cannot install because a used license file is specified. Try to specify the file again.>(指定了已使用的許可協議檔案,因此無法安裝。請嘗試重新指定檔案。)
原因
無法重新安裝已安裝的許可協議檔案。指定的許可協議檔案已安裝。
解決辦法
無法安裝指定的許可協議檔案。指定其他許可協議檔案。
<To install the specified application, a license file must be installed at the same time. Specify a license file.>(若要安裝指定的應用程式,必須同時安裝許可協議檔案。請指定許可協議檔案。)
原因
除非指定了適用於此應用程式的許可協議檔案,否則無法安裝應用程式。
解決辦法
指定要安裝的應用程式時,請同時指定相應的許可協議。
<The following information in the specified application is incorrect. Check the file. <Inaccurate information>>(指定的應用程式中的以下資訊不正確。請檢查檔案。<錯誤資訊>)
原因1
應用程式檔案中的<Inaccurate information>(錯誤資訊)無法識別為正確資訊。
解決辦法
請聯絡當地的授權Canon經銷商。
原因2
若<Inaccurate information>(錯誤資訊)是「MEAP Specifications」(MEAP規格),則應用程式和本機器的「MEAP Specifications」(MEAP規格)不相符。
解決辦法
請聯絡當地的授權Canon經銷商。
<The following information is missing in file for the specified application. Check the file. <Missing information>>(指定的應用程式檔案中缺少以下資訊。請檢查檔案。<遺漏資訊>)
原因
由於應用程式中不包括所需的資訊,因此無法安裝該應用程式。
解決辦法
請檢查檔案。若檔案沒有問題,請與當地的授權Canon經銷商聯絡以查看是否存在任何<Missing information>(遺漏資訊)。
<The specified application does not support this device.>(指定的應用程式不支援本裝置。)
原因
應用程式僅可以安裝在某些型號的機器中。本機器中無法安裝。
解決辦法
指定支援本機器的應用程式。
<The specified license does not match this device. Specify an installable license.>(指定的許可協議不適用於本裝置。請指定一個可安裝的許可協議。)
原因
許可協議檔案中包含可以安裝此許可協議檔案的機器的序號資訊。由於在該許可協議檔案的序號資訊中找不到本機器的序號,因此無法安裝已指定的應用程式。
解決辦法
指定序號資訊中包括本機器序號的許可協議檔案。
<Cannot install this application because an applet included in the specified application has exceeded the area that can be displayed in the device panel.>(由於指定應用程式中包含的Applet已超出裝置面板中可以顯示的區域,因此無法安裝該應用程式。)
原因
由於應用程式中包含的Applet的顯示區域超出本機器面板上可以顯示的區域,因此無法安裝應用程式。
解決辦法
無法安裝該應用程式。安裝僅包含不超出本機器最大顯示區域的Applet的應用程式。
<The specified file is an update file. Stop the system application that you want to update and then install the file.>(指定的檔案是更新檔案。請停止要更新的系統應用程式,然後安裝該檔案。)
原因
指定的檔案是用於更新已安裝應用程式的檔案。更新前必須停止要更新的應用程式。
解決辦法
停止要更新的應用程式,然後重新執行更新。
<The specified file is an update file for a login service that is currently being set. Switch to another login service, restart the device, and then install the file.>(指定的檔案是用於更新目前正在設定的登入服務的檔案。請轉換到其他登入服務,重新啟動裝置,然後安裝該檔案。)
原因
儘管檔案是用於更新目前正在設定的登入服務的檔案,但它不能更新已啟動的登入服務。
解決辦法
若要為登入服務安裝更新檔案,請啟動其他登入服務,然後安裝更新檔案。
<Cannot install this application because storage space has been exceeded. Uninstall other applications and then try to install it again.>(由於超過儲存空間容量,因此無法安裝該應用程式。請解除安裝其他應用程式,然後嘗試重新安裝。)
原因
由於記憶體上沒有足夠的剩餘空間,因此無法安裝應用程式。
解決辦法
解除安裝不需要的應用程式以釋放記憶體。
<Could not cancel installation. Installation has been successfully completed.>(無法取消安裝。已成功完成安裝。)
原因
無法取消安裝時按取消按鈕。已成功完成安裝。
解決辦法
解除安裝應用程式。
<The process is canceled because the system has been shut down.Restart the system, and then perform the process again.>(由於系統已關機,因此取消進程。重新啟動系統,然後重新執行進程。)
原因
由於與系統關機發生衝突,因此無法完成安裝。
解決辦法
重新啟動本機器後,再重新進行安裝。
<Error: <Error Details>>(錯誤:<錯誤詳細資訊>)
原因
由於某些原因發生的錯誤。請參閱<Error Details>(錯誤詳細資訊)獲取詳細資訊。
解決辦法
若<Error Details>(錯誤詳細資訊)中的錯誤解決辦法仍不明確,請聯絡當地的授權Canon經銷商。