Current Date and Time
Setting the current date and time is very important. The current date and time settings are used as standard timer settings for functions that require them.
|
GMT:
|
The time at the Greenwich Observatory in England is called GMT (Greenwich Mean Time).
|
|
Time Zone:
|
The standard time zones of the world are expressed globally in terms of the difference in hours (up to 12 hours) from GMT (0 hours). A time zone is a region throughout which this time difference is the same.
|
|
Daylight Saving Time:
|
In some countries, time is advanced throughout the summer season. The period in which this is applied is called "Daylight Saving Time."
|
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Preferences] → [Timer/Energy Settings] → [Date/Time Settings].
3.
Enter the current date and time using 
- 
(numeric keys).
- (numeric keys).
Enter the day and the month using four digits (including zeros). Enter all four digits of the year, and the time in 24-hour notation, as four digits (including zeros) without a space.
Examples:
|
6 May
|
→ 0605
|
|
7:05 a.m.
|
→ 0705
|
|
11:18 pm
|
→ 2318
|
|
NOTE
|
|
If you make a mistake when entering values, press
 (Clear) → enter the values again, starting with the month. |
Setting the Time Zone:
Press the <Time Zone> drop-down list → select the time zone.
Using Daylight Saving Time:
Press [On] → [Start Date].
Press the <Month> and <Day> drop-down lists → select the month and day.
Press [-] or [+] to adjust the time → press [OK].
Press [End Date] → select the month, day, and time at which Daylight Saving Time ends → press [OK].
|
NOTE
|
|
If you set Daylight Saving Time, the machine automatically sets the standard time of the machine one hour forward at the specified date and time.
|
4.
Press [OK].
|
NOTE
|
|
On the Settings/Registration screen, you can also specify to automatically synchronize the date and time with a server on the network using SNTP. (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
|