Changing the Default Settings for Send
You can change the default settings for Scan and Send.
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."
Changing the Default Settings for Send
1.
Press 
(Settings/Registration).
(Settings/Registration).To register changes to the default settings, you must set the Send mode in advance.
2.
Press [Function Settings] → [Send] → [Common Settings].
3.
Press [Change Default Settings].
4.
Press [Register].
The current send settings are set as the default settings.
5.
Press [Yes].
6.
Press [Close]
Initializing the Default Settings for Send
1.
Press (Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Send] → [Common Settings].
3.
Press [Change Default Settings].
4.
Press [Initialize].
5.
Press [Yes].