Editing Forwarding Settings
You can check or change forwarding settings that have been stored.
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Receive/Forward] → [Common Settings].
3.
Press [Forwarding Settings].
Checking/Changing Forwarding Settings:
Select the forwarding settings you want to check or change → press [Other Operations] → [Details/Edit].
Check or change the settings as necessary → press [OK].
|
NOTE
|
|
For more details on forwarding settings, see "Storing Forwarding Settings."
|
Forwarding Received Documents:
Select the forwarding settings → press [Validate/Invalidate].
Details of each item are shown below:
|
[On]:
|
Received files that match the forwarding conditions are forwarded to the specified destination.
|
|
[Off]:
|
Received files are not forwarded to the specified destination, even if they match the forwarding conditions.
|
To cancel this setting, press [Validate/Invalidate] again.
Deleting Forwarding Settings:
Select the forwarding settings that you want to delete → press [Delete] → [Yes].
4.
Press [Close].