Changing Basic Copy Ratios

You can manually specify basic copy ratios, or set them automatically.

You can set any copy (zoom) ratio from 25% to 400%.

IMPORTANT
Place your original horizontally when enlarging in the following ways with a preset zoom: Placing an original horizontally means setting the original with the longer side sideways. (See "Orientation.") A4 → A3, B4 B5 → B4 A5 → A3

Press [Copy].

Press [Copy Ratio] → set the copy ratio as necessary.

IMPORTANT
[Select Paper] must be set to [Auto].

Preset Zoom

Select the copy ratio.

Zoom by Percentage

Press [-] or [+] to specify the copy ratio.

Auto Zoom

Press [Auto].

IMPORTANT
If you set [Auto], manually select a paper size. If you do not select a paper size, the copy ratio is automatically set to match the paper loaded in paper drawer 1.

Fit to Page

Press [Fit to Page].

Press [OK].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart." If you are reducing A3 or B4 originals to A4 or B5 with [Auto Orientation] in [Function Settings] (Settings/Registration) set to 'Off', load A4R or B5R paper in a paper drawer or the multi-purpose tray. You cannot copy highly transparent originals, such as transparencies, in the Auto Zoom mode. Use the Preset Zoom or Zoom by Percentage mode. The original sizes you can use automatically are as follows: A3, B4, A4, A4R, B5, B5R, A5, A5R, A6R (You can place A6R originals only on the platen glass.)

IMPORTANT

For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

If you are reducing A3 or B4 originals to A4 or B5 with [Auto Orientation] in [Function Settings] (Settings/Registration) set to 'Off', load A4R or B5R paper in a paper drawer or the multi-purpose tray.

You cannot copy highly transparent originals, such as transparencies, in the Auto Zoom mode. Use the Preset Zoom or Zoom by Percentage mode.

The original sizes you can use automatically are as follows:

A3, B4, A4, A4R, B5, B5R, A5, A5R, A6R (You can place A6R originals only on the platen glass.)

NOTE
If the output size differs from your specified copy ratio, you can adjust it using [Fine Adjust Zoom] in [Adjustment/Maintenance] (Settings/Registration). (See "Fine Adjust Zoom.") The reduction ratios when the Fit to Page mode is specified are: A3/B4: about 98% A4/B5: about 97% A5: about 96%