Job Build

This mode enables you to scan multiple originals that are too many to be placed at once, by dividing them into multiple batches. You can use both the feeder and the platen glass for scanning. The originals are copied as one document after all of the batches have been scanned.

Press [Copy].

Press [Options] → [Job Build] → [Close].

Press

(Start).

NOTE
To cancel scanning, press [Stop] or (Stop).

When scanning is complete, place your next batch of originals → press

(Start).

If you want to change the scan settings for the next original, press [Change Settings]. If you want to change the settings, change them before pressing

(Start).

You can press [Change Settings] to change the following settings:

Select Colour: → Switching the Colour Mode

Copy Ratio: → Changing Basic Copy Ratios, Zoom by Length, and Setting the X and Y Axes Independently

2-Sided: → Two-Sided Copying

Density: → Adjusting Density Manually and Adjusting Background Density

Original Type: → Setting Original Type

When scanning is complete, press [Start Copying].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart." If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete. You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary copy/scan settings in advance. However, if you specify the N on 1 mode together with the Job Build mode, you cannot change the original type, density, and select colour settings.

IMPORTANT

For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."

If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.

You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary copy/scan settings in advance. However, if you specify the N on 1 mode together with the Job Build mode, you cannot change the original type, density, and select colour settings.

NOTE
If you want to place different size originals in the feeder, set the Different Size Originals mode. (See "Different Size Originals.") When copying, if you want to copy one-sided and two-sided originals as two-sided copies, divide the originals into one-sided and two-sided batches. For example, if the first batch of originals to be copied consists of two-sided originals, set the 2-Sided Original mode accordingly. Then manually set or cancel the 2-Sided Original mode for each batch of originals that you scan.

NOTE

If you want to place different size originals in the feeder, set the Different Size Originals mode. (See "Different Size Originals.")

When copying, if you want to copy one-sided and two-sided originals as two-sided copies, divide the originals into one-sided and two-sided batches. For example, if the first batch of originals to be copied consists of two-sided originals, set the 2-Sided Original mode accordingly. Then manually set or cancel the 2-Sided Original mode for each batch of originals that you scan.