Setting the Control Panel Display
You can specify the control panel display settings.
If you are using a login service, you can restrict access to the Status Monitor/Cancel screen.
1.
Press 
(Settings/Registration).
(Settings/Registration). 2.
Press [Management Settings] → [Device Management] → [Display Job Status Before Authentication].
3.
Press [On] → [OK].
If the Display Status Before Authentication mode is set to 'Off':
: Displayed -: Not Displayed|
Department ID Management or Log In Service, such as SSO-H
|
The Status Monitor/Cancel Screen
|
|
|
Copy/Print, Send, Receive, Store
|
Consumables
|
|
|
Before Logging In
|
-
|
|
|
After Logging In
|
|
|
|
IMPORTANT
|
|
Even if you set the Display Status Before Authentication mode to 'Off', access to the Status Monitor/Cancel screen is only restricted if a login service is set.
|
You can set whether to display job logs from the Status Monitor/Cancel screen. For display information of the Status Monitor/Cancel screen, see "Status Monitor/Cancel."
1.
Press (Settings/Registration).
(Settings/Registration). 2.
Press [Management Settings] → [Device Management] → [Display Log].
3.
Press [On] → [OK].
If you do not want to display job logs, press [Off] → set the items for <Obtain Job Log From Management Software> → press [OK].
Press [Allow] to allow the collection of job logs using management software.
Press [Allow] to allow the collection of job logs using management software.