Basic Printing Procedure

The basic method for printing using the printer driver is as described below.
1.
Select [Print] from the application menu.
The [Print] dialog box is displayed.
When printing from a Windows Store app, because you cannot display the print settings screen of the driver, the number of functions you can set is limited.
2.
Select the name of the printer you are using → click [Printer properties] (or [Properties]).
The print settings screen of the printer driver is displayed.
3.
Set [Copies] in the [Basic Settings] tab.
4.
Select the page size you want to print on from [Output Size].
If you select a size that differs from the size selected from [Page Size] (the page size of the print data), the print data is scaled to fit the [Output Size] page size (see Scaling).
5.
Configure other settings where required.
To print multiple page data on one sheet: Select the [Page Layout] → [N on 1]
To switch between one-sided and two-sided printing: Select the [1-sided Printing] or [2-sided Printing]
Click each tab to set the required functions.
Functions Common to All Tabs (What You Can Do)
[Page Setup] Tab (What You Can Do)
[Finishing] Tab (What You Can Do)
[Paper Source] Tab (What You Can Do)
[Quality] Tab (What You Can Do)
6.
Click [OK] in the print settings screen of the printer driver.
7.
Click [Print] (or [OK]).
Printing starts.

References

If you cannot set the page size, print orientation, etc. from the printer driver, set them by selecting [Print Setup], [Page Setup], or a similar command from the [File] menu of the application.
When printing from a Windows Store app, if a message prompting you to move to the desktop screen is displayed, move to the desktop and follow the instructions in the message.