[PS Options] Dialog Box
Enables you to configure PS options.
Descriptions under [Device Settings] Tab (Settings)Procedure for Data Format Settings
Descriptions of Settings
[Data Protocol]
Select a transmission format for PS data to be sent from the printer driver from among [ASCII] and [Binary].
|
If you are using a printer on a network, selecting [Binary] is recommended.
|
[Send CTRL+D Before Job]
Sends the reset-memory code CTRL+D before the print job. CTRL+D notifies the printer that the current print job has finished.
[Send CTRL+D After Job]
Sends the reset-memory code CTRL+D after the print job. CTRL+D notifies the printer that the current print job has finished.
[Print PS Error Information]
If you select [On], PS error information is printed after the current print job has finished.
[Prioritize Enlarge/Reduce Settings of Driver]
Prioritizes the scaling settings of the driver.