Booklet Printing

You can bind printed documents into a booklet by printing 2 pages of a document onto each side of the paper, such that they can be folded in half to create a booklet (4 pages of a document are printed onto one sheet of paper).
1.
Display the [Basic Settings] or [Finishing] tab.
2.
Select a printing method.
From the [Basic Settings] tab: Select [1-sided/2-sided/Booklet Printing] - [Booklet Printing] - click [Booklet]
From the [Finishing] tab: Select [Print Style] - [Booklet Printing] - click [Booklet]
 
The [Detailed Settings for Booklet] Dialog Box is displayed.
3.
Select [Specify Booklet Gutter] → specify a gutter width in [Booklet Gutter] → click [OK].
4.
If you want to perform saddle stitching, select a finishing method from [Saddle Stitch Settings].
To trim the edges of the pages so that they are all in alignment, select [Fold + Saddle Stitch + Trim] → set [Adjust Trim Width by]/[Trim Settings].

Creep (Displacement) Correction

If you trim the edges of the pages using a trimmer when printing a booklet, you can adjust the amount of margin so that the position of the print data on the page does not deviate between pages.
1.
Display the [Basic Settings] or [Finishing] tab.
2.
Select a printing method.
From the [Basic Settings] tab: Select [1-sided/2-sided/Booklet Printing] - [Booklet Printing] - click [Booklet]
From the [Finishing] tab: Select [Print Style] - [Booklet Printing] - click [Booklet]
 
The [Detailed Settings for Booklet] Dialog Box is displayed.
3.
Select [Booklet Printing Process] → [With Device Settings].
4.
Select [Use Creep (Displacement) Correction] → set [Displacement Correction Method] → click [OK].
If you use this function, the paper sizes that are available are A4, B4, A3, and 11x17.

About this Function

Required Options
Saddle stitching: Saddle finisher
Fore trimming (Specify finishing width): Saddle finisher and trimmer
3-direction trimming (Specify finishing width and height): Saddle finisher, trimmer, and two-knife booklet trimmer
Functions that Cannot Be Used with this Function
[Basic Settings] or [Page Setup] tab → [Manual Scaling]
[Basic Settings] or [Finishing] tab → [Finishing] → [Collate]/[Staple + Collate]/[Eco (Staple-Free) + Collate]/[Staple & Collate]
[Basic Settings] or [Finishing] tab → [Finishing] → [Group]/[Staple + Group]/[Eco (Staple-Free) + Group]/[Staple & Group]
[Finishing] tab → [Print with Mixed Paper Sizes/Orientations]
References
The pages may not be able to be trimmed, depending on the function version of the printer.
Select [With Application Settings] for [Booklet Printing Process] only when configuring the booklet printing settings from the application. Also, in this case all paper sizes other than postcard, envelope, SRA3, and custom paper size can be selected for [Page Size].
When [With Device Settings] is selected for [Booklet Printing Process], the paper sizes that are available are A4, B4, A3, and 11x17.
The document may not be printed correctly if you use this function together with the overlay printing function.
[Adjust Trim Width by]/[Trim Settings] can only be set from the [Finishing] tab.