Setting Device Information
In the following cases, it is necessary to set the options of the device according to this procedure.
The device information was not retrieved during installation.
The device function and options are not set correctly in the [Device Settings] sheet.
An option has been added to the device.
The fax transmission settings of the device have been changed.
Prerequisites
Settings at the device
If the device is connected via a WSD port, [Use WSD Browsing] is already enabled.
If the device is connected by specifying a standard TCP/IP port, [Retrieve Printer Mngt. Information from Host] is already enabled.
For details, refer to the manual of the device.
When starting the computer, log on as a user with administrator privileges.
Procedures
1.
Display the printer properties screen.
(1) Display [Bluetooth & devices] (or [Devices]) from [
Settings] in the Start menu.
Settings] in the Start menu.(2) In [Printers & scanners], display the management screen for the device to set.
To display the management screen, click the device or click [Manage] for the corresponding device.
(3) Click [Printer properties] for the device to set.
2.
Display the [Device Settings] sheet.
3.
Click [Retrieve Device Information].
4.
If the message "Do you want to retrieve the device information?" is displayed, click [Yes].
If the information has been retrieved, confirm the automatically set option configuration.
If the information is not retrieved, set the option configuration manually. Select the options attached to the device.
5.
Click [Detailed Settings] → set as required.
The items in [Detailed Settings] are not set automatically. If necessary, set them manually.
6.
In the [Device Settings] sheet, click [OK] or [Apply].