Basic Copy Operations

1
Place documents.
"Placing Documents"
"Supported Document Types"
Up to 50 documents can be loaded into the feeder.
2
Display the Copy mode screen.
The Copy mode screen appears.
3
Specify the copy settings as needed.
"Adjusting the Density"
"Selecting the Original Type"
"2-Sided Copying"
"Enlarging/Reducing Copies"
"Copying Multiple Documents onto One Sheet (N on 1)"
"Collating Copies"
NOTE
Copy Settings:
The settings specified here are effective only for the current operation. To make the settings effective for all the copy operations, see "Changing the Default Settings."
4
Enter the copy quantity (1 to 99) using numeric keys.
Press [] (Clear) to cancel the entered quantity.
5
Press [] (Start).
Copying starts.
 If <Scan Size> appears:
Press [] or [] to highlight the size of the original document, and then press [OK].
 If <Size/Settings Mismatch> appears:
Change the <Paper Settings> menu properly or load the paper size specified in the <Paper Settings> menu.
"When <Size/Settings Mismatch> Appears"
 If <The memory is full. Scanning will be canceled. Print?> appears:
Either print all pages that were successfully scanned or cancel the job.
IMPORTANT
To copy a document without margins:
The image may be partially cut off on the output. For more information on the scanning area, see "Scan Area."
0HH3-02C