Paper Creases
Try one of the following to solve the problem.
<Cause 1> The paper is not loaded properly.
|
Solution
|
Load the paper properly.
|
<Cause 2> Damp paper is used.
|
Solution
|
Replace the paper with new paper in an unopened package.
|
<Cause 3> The paper type loaded is not appropriate.
|
Solution
|
Make sure that the number and type of the paper loaded in the drawer meets the paper requirements.
|
<Cause 4> There is a foreign object inside the machine.
|
Solution
|
Remove the foreign object from the machine.
|
<Cause 5> Depending on the paper type or the operating environment, the paper may be creased.
|
Solution
|
Change the <Special Mode N> setting from the operation panel.
|