Adjusting a Drawer to Hold a Different Paper Size (Drawer 1)
If you want to change the size of paper in the drawer 1, follow the procedure described below to adjust the drawer guides.
1
Pull out the drawer 1, and remove all the loaded paper.
2
Push down the metal plate to lock it.
3
Slide the right guide while squeezing it on the top to align it with the mark for the desired paper size.
4
Slide the front guide while squeezing it on the top to align it with the mark for the desired paper size.
|
IMPORTANT
|
|
Slide the guides until they click into place. It is also necessary to adjust the guides correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.
|
5
Load the appropriate size paper into the drawer 1.
 CAUTION |
|
Take care not to cut your hands on the edges of the paper when loading it into the machine.
|
6
Gently push the drawer 1 back into the machine until it clicks into place in the closed position.
|
CAUTION |
|
When returning the drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury.
|
7
Specify the size and type of paper you loaded.