Setting the Paper Size and Type

If you have to change the paper size and type loaded in the drawer, follow the procedure in this section to adjust the paper size and type settings.
You can also register a default paper size and paper type for the multi-purpose tray, which is convenient if you always load paper of the same size and type.
IMPORTANT
If the setting is different from the size of the loaded paper:
An error message appears or the machine may not perform as expected. However, an error message may not be displayed, depending on the paper size you loaded. When printing on a paper size that differs from the setting specified here, check whether the paper size you loaded is the same as the setting.
1
Press [] (Paper Selection/Settings).
To specify the paper source:
Press [] or [] to highlight <MP Tray> or <Drawer 1>, and then press [OK].
If paper is loaded into the multi-purpose tray at this point, step 2 begins automatically.
To specify the paper size and paper type for each paper source:
Press [] or [] to highlight <Paper Settings>, and then press [OK].
Press [] or [] to highlight a paper source, and then press [OK].
To register the default paper size and paper type for the multi-purpose tray, select <MP Tray>, press [OK], and then select <On> on the [Register Default Set.] screen.
2
Press [] or [] to highlight a paper size, and then press [OK].
For information on setting [Custom] for the multi-purpose tray, see "Setting a Custom Paper Size."
3
Press [] or [] to highlight the desired paper type, and then press [OK].
"Supported Paper Types"
4
Press [] (Paper Selection/Settings) to close the <Paper Settings> screen.
0H88-011