Specifying Display Settings for the Job Log
Specify whether or not to display job log information such as printing.
1
Press [
] (Settings/Registration).
] (Settings/Registration).2
Press [
] or [
] to highlight <System Management Settings>, and then press [OK].
] or [] to highlight <System Management Settings>, and then press [OK].If System Manager Information Settings are specified:
Press [
] or [
] to enter the System Manager PIN, and then press [OK].
] or [] to enter the System Manager PIN, and then press [OK].
Press [] to highlight <Apply>, and then press [OK].
] to highlight <Apply>, and then press [OK].3
Press [] or [] to highlight <Display Job Log>, and then press [OK].
] or [] to highlight <Display Job Log>, and then press [OK].
4
Press [] or [] to highlight <Off> or <On>, and then press [OK].
] or [] to highlight <Off> or <On>, and then press [OK].
|
<Off>
|
The log does not display on the status monitor screen.
|
|
<On>
|
The log displays on the status monitor screen.
|
5
Press [] (Settings/Registration) to close the Settings/Registration screen.
] (Settings/Registration) to close the Settings/Registration screen.6
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.