Turning On the Machine and Specifying the Initial Settings
After connecting the power cord, turn ON the power and specify the initial settings.
1
Turn ON the machine.
2
On the operation panel, press [
] or [
] to highlight the desired display language, and then press [OK].
] or [] to highlight the desired display language, and then press [OK].
3
A screen confirming whether you want to register consumable purchase information appears.
Press [
] to highlight <Yes>, and then press [OK].
] to highlight <Yes>, and then press [OK].4
Place the documentation on the platen glass, and then close the feeder (DADF-AM1) or platen cover.
5
Press [
] (Start) to register the documentation.
] (Start) to register the documentation.If a message indicating that there is insufficient memory is displayed, set a lower density on the Copy mode screen or make the business card or other original on the platen glass smaller.
A screen confirming whether you want to print registered consumable purchase information appears.
6
Initial screen appears, and initial setting is finished.
|
Continue with the steps in the procedure below to set the paper size and type.
 "Setting the Paper Size and Type" |