Installing the MF Drivers and MF Toolbox

See "Attention (MF Drivers and MF Toolbox)" in advance.
If you are using the machine in an IPv6 environment, you cannot use the MF Drivers or MF Toolbox.
If you are using the machine in an IPv6 environment, you cannot use the Scan function.
 If the computer you are installing the drivers in is running a 64-bit operating system, download the 64-bit version drivers from the Canon web site.
To install the software, perform the following operations:
1. Decompress the downloaded file.
2. Double-click the [Setup.exe] file to start the installer.
3. Follow the instructions on the screen.
Install the software required to use the machine.
There are two methods of installation. The default installation method is [Easy Installation].
"Installing with [Easy Installation]"
If you want to install the following software or manuals that are not installed in [Easy Installation], install them using [Custom Installation].
e-Manual
"Installing with [Custom Installation]"
NOTE
USB Cable Connection:
Install the software, and then connect the USB cable.

Installing with [Easy Installation]

1
Insert the User Software CD-ROM into the computer.
2
Click [Easy Installation].
 If the above screen is not displayed:
"Basic Windows Operations"
 If the language selection screen is displayed before the CD-ROM setup screen appears:
Select the language and click [OK].
3
When the following screen appears, select the connection for a computer.
USB Cable Connection:
Select [USB Connection], and click [Next].
Network Connection:
Select [Network Connection], and click [Next].
4
Click [Install].
5
Read the License Agreement, and then click [Yes].
6
Click [Next].
When the following screen is displayed, click [Yes].
USB Cable Connection:
Proceed to step 9.
Network Connection:
Proceed to step 7.
7
Select a target device to install the driver.
(1)
Select the device.
(2)
Click [Next].
 If nothing is displayed in [Device List]:
Perform the following operation:
1.
Check the following items:
Are the computer and the device connected through the network?
Is the device turned ON?
Is the IP address set correctly?
Are the computer and the device on the same subnet?
Is the security software disabled?
2.
Click [Update Device List].
If nothing is displayed in [Device List] even after performing the above operations, perform the following operations:
1.
Click [Manual Search by IP Address].
2.
Enter the IP address of the device you want to install.
"Confirming IP Address Settings(imageRUNNER 2202N/2002N Only)"
If the IP address of the device is between 169.254.1.0 and 169.254.254.255, it is an IP address assigned by the Auto IP function.
If an IP address other than a Link-Local Address is set in the computer, manually set the IP address of the machine (something other than a Link-Local Address) to be one within the same subnet as the computer.
Searching for the machine with the installer is now possible.
"Setting the IPv4 Address"
3.
Click [OK].
8
Click [Start] to start installation.
9
Click [Exit].
USB Connection:
Network Connection:
Next, the MF Toolbox installation begins.
If your computer is using Windows Server 2003/Server 2008/Server 2012, MF Toolbox is not installed. Proceed to step 12.
10
Click [Start].
11
Click [Exit].
12
Confirm that the applications you want to install are selected, and then click [Next].
13
Restart the computer.
(1)
Select the [Restart Computer Now (Recommended)] check box.
(2)
Click [Restart].
If this screen is displayed, you can remove the CD-ROM from the CD-ROM drive.
If you are using a USB connection, after restarting the computer, connect the machine and computer with the USB cable included with the machine.
"USB Cable Connection (Only when connecting with USB)"
If you are using a network connection, check the installation results.
"Checking the Installation Results"

Installing with [Custom Installation]

1
Insert the User Software CD-ROM into the computer.
2
Click [Custom Installation].
 If the above screen is not displayed:
"Basic Windows Operations"
 If the language selection screen is displayed before the CD-ROM setup screen appears:
Select the language and click [OK].
3
When the following screen is displayed, select the connection method for the computer.
USB Cable Connection:
Select [USB Connection], and click [Next].
Network Connection:
Select [Network Connection], and click [Next].
4
Select the software you want to install, and then click [Install].
5
Confirm the License Agreement, and then click [Yes].
6
Click [Next].
When the following screen is displayed, click [Yes].
USB Cable Connection:
Proceed to step 13.
Network Connection:
Proceed to step 7.
7
Select a target device to install the driver.
(1)
Select the device.
(2)
Click [Next].
 If nothing is displayed in [Device List]:
Perform the following operation:
1.
Check the following items:
Are the computer and the device connected through the network?
Is the device turned ON?
Is the IP address set correctly?
Are the computer and the device on the same subnet?
Is the security software disabled?
2.
Click [Update Device List].
If nothing is displayed in [Device List] even after performing the above operations, perform the following operations:
1.
Click [Manual Search by IP Address].
2.
Enter the IP address of the device you want to install.
"Confirming IP Address Settings(imageRUNNER 2202N/2002N Only)"
If the IP address of the device is between 169.254.1.0 and 169.254.254.255, it is an IP address assigned by the Auto IP function. If an IP address other than a Link-Local Address is set in the computer, manually set the IP address of the machine (something other than a Link-Local Address) to be one within the same subnet as the computer.
Searching for the machine with the installer is now possible.
"Setting the IPv4 Address"
3.
Click [OK].
8
Select the functions you want to use.
(1)
Select the functions (drivers to install) you want to use.
(2)
Click [Next].
[Printer]
Select this to use the Print function.
[Scanner]
Select this to use the Scan function.
9
Set the printer information.
(1)
Set each item as required.
(2)
Click [Next].
Printer information*1
*1
This is only displayed if you selected [Printer] in step 8.
[Printer Name]
Enter the new name here if you want to change the printer name.
[Use as Shared Printer]
Select this if you want to share this printer.
[Shared Name]
Change this as required if you want to share this printer.
NOTE
If the [Use as Shared Printer] check box is selected:
Install additional drivers with the following procedure:
1.
Click [Drivers to Add].
2.
Select the operating system displayed in [Drivers to Add].
3.
Click [OK].
If the computer you are installing the drivers in is running a 64 bit operating system, installing from the network into a client in one of the following 32 bit operating systems is not supported due to Windows restrictions.
Windows XP (with no service pack installed or SP1)
Windows Server 2003 (with no service pack installed)
Downloading and installing the drivers into the client on one of the above operating systems causes the installation to fail, and you may not be able to open the printer driver screen etc.
If the computer you are installing the drivers in is running one of the following 32 bit operating systems, you cannot install additional 64 bit drivers.
Windows XP (with no service pack installed or SP1)
Windows Server 2003 (with no service pack installed)
10
Click [Start] to start installation.
11
Select a printer as the default printer.
(1)
Select a printer from the list.
(2)
Click [Next].
12
Select a printer as the default printer.
(1)
Select a printer from the list.
(2)
Click [Next].
13
Click [Exit].
USB Cable Connection:
Network Connection:
Next, the MF Toolbox installation begins.
If any of the following is true, MF Toolbox is not installed. Proceed to step 16.
If you are using Windows Server 2003/Server 2008/Server 2012
If you cleared the [MF Toolbox] check box in step 4
14
Click [Next].
The screen to set the MF Toolbox installation destination, and to set where in the [Start] Menu to add the MF Tool Box to, is displayed.
Perform the settings in each screen, and then click [Next]. Click [Start] on the screen that is displayed.
15
Click [Exit].
Next, the software selected in step 4 is installed. Follow the instructions on the screen.
16
Confirm that the applications you want to install are selected, and then click [Next].
17
Restart the computer.
(1)
Select the [Restart Computer Now (Recommended)] check box.
(2)
Click [Restart].
If this screen is displayed, you can remove the CD-ROM from the CD-ROM drive.
If you are using a USB connection, after restarting the computer, connect the machine and computer with the USB cable included with the machine.
"USB Cable Connection (Only when connecting with USB)"
If you are using a network connection, check the installation results.
"Checking the Installation Results"

USB Cable Connection (Only when connecting with USB)

1
Connect the USB cable.
Flat end (A):
Connect this end to the USB port on the computer.
Square end (B):
Connect this end to the USB port on the machine.
 If a dialog box is displayed:
Follow the instructions on the screen to complete the installation.
Check the installation results after installation is completed.
"Checking the Installation Results"

Checking the Installation Results

Check that the MF Driver, the MF Toolbox, any additional software, and the e-Manual have been correctly installed.
Check that the icons of the installed software have been added as shown below.
NOTE
Displayed Icons:
Depending on the operating system, the driver for each icon is displayed separately, or only a representative icon is displayed.
Software
Location
Icon
Printer driver
Printer folder
"Basic Windows Operations"
Scanner driver
[Scanners and Cameras] or
[Scanners and Cameras
Properties] folder
"Basic Windows Operations"
Network Connection
USB connection
MF Toolbox
Desktop
Network Scan Utility
Taskbar
e-Manual
Desktop
0FJJ-00S