Common Settings

 
All the settings about the operation of the paper drawer and the paper feed method are listed with short descriptions. Default settings are marked with a dagger ().
NOTE
Asterisks (*)
Settings marked with "*1" are only available when the optional paper drawer (drawer 2) is attached.
Settings marked with "*2" are only available for the imageRUNNER 1435iF.

Drawer Auto Selection On/Off

Enable or disable the automatic drawer selection feature for the paper sources. If automatic drawer selection is set to <On> when printing documents, the machine automatically selects a paper source that is loaded with the appropriate paper size. Also, when the paper runs out, this setting enables continuous printing by switching from one paper source to another that is loaded with the same paper size. You can select a function, such as copy or print, to enable this feature.
Copy
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*1
Off
On
 
Printer
Drawer 1
Off
On
Drawer 2*1
Off
On
 
Fax*2
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*1
Off
On
 
Other
Multi-Purpose Tray
Off
On
Drawer 1
Off
On
Drawer 2*1
Off
On

Switch Paper Feed Method

Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing. However, if you change the setting to <Print Side Priority>, you can always use the paper that is facing for 2-sided printing when you perform 1- and 2-sided printing. For more information, see Loading Preprinted Paper.
Multi-Purpose Tray
Speed Priority
Print Side Priority
 
Drawer 1
Speed Priority
Print Side Priority
 
Drawer 2*1
Speed Priority
Print Side Priority
0RCJ-090