Output Tray Designation

You can designate which output tray to use for specific functions.

The output trays indicated by Tray A, B, or C vary according to the attached optional products.

Options Attached	Default Setting	Tray A/B/C
Finisher-AN1	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Saddle Finisher-AN2	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 1 Receive, 1 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 2 Receive, 2 Other
Finisher-AN1 + High Capacity Stacker-H1	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other Tray C: 1 Receive, 1 Other
Saddle Finisher-AN2 + High Capacity Stacker-H1	Tray A: 1 Copy, 1 Access Stored Files, 1 Printer, 2 Receive, 2 Other Tray B: 2 Copy, 2 Access Stored Files, 2 Printer, 3 Receive, 3 Other Tray C: 1 Receive, 1 Other

Press

(Settings/Registration).

Press [Function Settings] → [Common] → [Paper Output Settings].

Press [Output Tray Settings].

Set the output and priority settings for Tray A/B/C → press [OK].

[Other] is used for setting the priority for printing reports.

If you want to use an output tray for only one function, select only that function.

Details of each item are shown below:

[Tray B]: Tray B moves closer to the output area.

[Tray C]: Tray C moves closer to the output area.

[Off]: The tray home position is not set. The output tray stops at the position it is when printing finishes.

IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for I-fax documents to prevent them from getting lost.

NOTE
You can designate an output tray for multiple functions. The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1" and "2."