NOTE
|
If the colour mode is set to [Black & White], the Photo Optimizer PRO is disabled.
The effect of the Photo Optimizer PRO depends on the data.
The Photo Optimizer PRO is not applied to images that meet the following conditions.
Small images with 400 pixels or less
Images with a skewed histogram distribution
Images that are determined to not require correction after being analyzed by this function
When an image is divided into multiple parts, the desired results may not be obtained because correction is performed on each divided image separately.
|
NOTE
|
If the colour mode is set to [Black & White], the Red-Eye Correction mode is disabled.
To activate the settings for "Red-Eye Correction Level", set "Red-Eye Correction" to [On].
The effect of the Red Eye Correction differs, depending on the data.
Corrections are applied only to images with vertical and horizontal sizes of 100 pixels or more.
|
NOTE
|
If the colour mode is set to [Black & White], the Face Brightener mode is disabled.
To enable the [Face Brightener Level] setting, set [Face Brightener] to [On].
The effect of the Face Brightener mode depends on the data.
Corrections are applied only to images with vertical and horizontal sizes of 100 pixels or more.
When an image is divided into multiple parts, the desired results may not be obtained because correction is performed on each divided image separately.
|