Scanning Different Size Originals Together (Different Size Originals)
The Different Size Originals mode enables you to place different size originals into the feeder and scan them at the same time.
The combinations of the paper sizes available for the Different Size Originals mode are as follows:
The combinations of the paper sizes available for the Different Size Originals mode are as follows:
A4 and A3
A4R and A5
|
IMPORTANT
|
|
The combinations other than described above may wrinkle originals.
The Different Size Originals mode is available only when the machine is equipped with the feeder (optional for the imageRUNNER 2525/2520).
Make sure that the different sized originals are of the same weight (paper type).
If the Different Size Originals mode is set, the scanning speed may be slower than normal.
The Different Size Originals mode cannot be used with the following modes:
Document Size (except for [Auto]) (Specifying the Document Size)
|
1
Press 
(SEND) → place your originals into the feeder → specify the destination.
(SEND) → place your originals into the feeder → specify the destination.
Align the top and bottom edges of the originals with the edges of the feeder by adjusting the slide guides.
NOTE:
For instructions on how to place your originals, see Basic Operations.
For instructions on how to specify the destination, see Basic Sending Methods or Specifying Destinations Easily and Quickly.
2
Press [Scan Settings] → select [Option].
For help, see step 2 in Specifying the Document Size.
3
Press [Different Size Origin].
4
Press [OK].
NOTE:
To cancel the specified settings, press [Cancel] on the Scan Settings screen or press 
(Reset).
(Reset).5
Press 
(Start) to start scanning your originals.
(Start) to start scanning your originals.To cancel scanning, press [Cancel] or 
(Stop).
(Stop).The scanned data is sent to the specified destination when scanning is complete.