1
|
Enter the current date and time using - (numeric keys).
Enter the day, month, and year, and then the time in 24-hour notation:
DD/MM YYYY hh:mm
Example) 10:05 p.m. on May 6, 2011 → 06/05 2011 22:05
|
2
|
Press [OK].
NOTE:
If you make a mistake when entering numbers, press (Clear) → enter the correct numbers.
|
1
|
Press [Time Zone Settings].
|
2
|
Press [] or [] until the desired time zone appears in the list.
GMT (Greenwich Mean Time):
The time at the Greenwich Observatory in England. The standard time zones of the world are expressed globally in terms of the difference in hours (up to ±12 hours) from GMT (±0 hours). |
3
|
Select the time zone in which the machine is located.
|
4
|
Press [OK].
|
1
|
Press [Daylight Saving Time Settings].
|
2
|
Press [On] → [Start Date].
|
3
|
Specify the start date (month, week, and day) of the daylight saving time using the drop-down list boxes → press [OK].
|
4
|
Press [End Date].
|
5
|
Specify the end date (month, week, and day) of the daylight saving time using the drop-down list boxes → press [OK].
NOTE:
If the daylight saving time is set, the machine automatically shifts the standard clock forward by one hour.
|
6
|
Press [OK].
|
NOTE
|
To set the machine to manually enter the Sleep mode, or to wake the machine from the Sleep mode, press the control panel power switch.
The machine will not enter the Sleep mode in the following cases:
The machine is in operation.
Paper is jammed in the machine.
All the paper drawers are empty for which APS/ADS are enabled for copying.
The toner cartridge is empty.
A service call message is displayed on the screen.
The machine will automatically wake from the Sleep mode when the machine receives jobs to print.
The default settings are ‘On’ and ‘2 min’.
|
NOTE
|
The default setting is ‘2 min’.
|