Multiple Originals onto One Sheet

This mode enables you to automatically reduce two or four originals to fit onto one side or both sides of a selected paper size. In addition, the ID Card Copy mode enables you to copy the both sides of an ID card on one side of paper.

2 on 1 and 4 on 1 copy (Image Combination)

This mode enables you to automatically reduce two or four originals, as well as two-sided originals or the facing pages of a book, to fit onto one side or both sides of a selected paper size.
2 on 1 Copy
4 on 1 Copy
IMPORTANT
The 2 on 1 and 4 on 1 combination modes cannot be used with the Automatic Paper Selection, 2-Page Separation, Original Frame Erase, Book Frame Erase, Different Size Originals, Booklet modes.
Custom size paper and envelopes cannot be used for the 2 on 1 or 4 on 1 combination modes.
NOTE
The reduction ratio is automatically set so that the originals fit onto the selected paper size. You cannot change the copy ratio after setting the 2 on 1 or 4 on 1 combination mode.

ID Card Copy

ID Card Copy mode enables you to copy the both sides of an ID card on one side of paper at actual size.
IMPORTANT
The ID Card Copy mode cannot be combined with the Automatic Paper Selection, 2-Sided Copying, or Frame Erase modes.
NOTE
You must place the card on the platen glass when using this function.
The zoom ratio is automatically set to 100% with this mode. You cannot change the copy ratio.
The ID Card Copy mode can be used with A4 or A4R paper.

Making 2 on 1 or 4 on 1 Copies (Image Combination)

1
Place your originals → press [Special Features] → [Image Combination].
2
Select the original size → press [Next].
IMPORTANT:
You can set the Image Combination mode only for the original paper sizes shown on the touch panel display.
NOTE:
To select the paper size in inches, press [Inch-size].
If you are copying two-sided originals:
1
Press [2-Sided Original].
NOTE:
[2-Sided Original] is available only when the machine is equipped with the feeder (optional for the imageRUNNER 2545W/2535W/2530W/2525W/2520W).
2
Select the type of two-sided original → press [OK].
[Book Type]: The front and back sides of the original have the same top-to-bottom orientation.
[Calendar Type]: The front and back sides of the original have opposite top-to-bottom orientations.
3
Press [Next].
3
Select the desired Image Combination feature → press [Next].
NOTE:
To specify the image order, select the desired one before pressing [Next]. (If you want to specify the image order:) If you do not change the image order by pressing [Option], the images are copied as follows:
'2 On 1': Left → Right
'4 On 1': Upper Left → Upper Right → Lower Left → Lower Right.
If you want to make 2-sided copies:
1
Press [2-Sided Copy].
2
Select the type of two-sided copy → press [OK].
[Book Type]: The front and back sides of the copy will have the same top-to-bottom orientation.
[Calendar Type]: The front and back sides of the copy will have opposite top-to-bottom orientations.
3
Press [Next].
If you want to specify the image order:
1
Press [Option].
2
Select the image order → press [Done] → [Next].
If you select [2 On 1], the display below appears.
If you select [4 On 1], the display below appears.
4
Select the desired paper size → press [OK] → [Done].
The display returns to the top screen.
5
Enter the desired copy quantity (from 1 to 999) using  -  (numeric keys).
6
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on the touch panel display → press  (Start) once for each original. When scanning is complete, press [Done].
Copying starts.
If you are copying in the Collate, Staple, or Offset + Collate mode, copying starts when the scanning of all pages is complete. Otherwise, copying starts when enough pages to make a 2 on 1 or 4 on 1 Combination copy have been scanned.
NOTE:
To cancel this setting, press [Special Features] → [Image Combination] → [Cancel].
To cancel all settings and return the machine to the Standard Settings, press  (Reset).

Making ID Card Copies

1
Press [Special Features] → [ID Card Copy].
2
Select the type of layout → press [Next].
3
Select the paper source → press [OK] → [Done].
Select the size of the paper that is loaded in a paper drawer or the stack bypass.
4
Enter the desired copy quantity (from 1 to 999) using  - (numeric keys).
5
Press  (Start).
The display above appears.
6
Place the ID card on the platen glass → press  (Start).
Place the ID card on the upper left corner of the platen glass as shown above.
7
Turn over the ID card and place it on the platen glass → press  (Start).
For instructions on how to place the ID card, see step 6.
Scanning for the other side of the ID card starts and copying starts.
10AS-01S