Setting the Use of HTTP
You can enable or disable HTTP on the machine. HTTP is used for communicating to a networked computer via the Remote UI.
IMPORTANT
|
Changes made to Use HTTP become effective when the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before You Start Using the Machine,” in the User’s Guide.
|
NOTE
|
The default setting is ‘On’.
|
1
Press
(Additional Functions) → [System Settings] → [Network Settings].
2
Press [TCP/IP Settings].
3
Press [
] or [
] until [Use HTTP] appears → press [Use HTTP].
4
Press [On] or [Off] to enable or disable HTTP → press [OK].
NOTE:
Pressing [Off] for [Use HTTP] automatically sets [Remote UI On/Off] to ‘Off’. (
Restricting the Remote UI)
5
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.