IMPORTANT
|
Changes made to RUI settings become effective when the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before You Start Using the Machine,” in the User’s Guide.
|
NOTE
|
For more information on the Remote UI, see Using the Remote UI.
To use the Remote UI, it is necessary to set up the communication environment. For help, see Communication Environment Settings.
|
NOTE
|
The default settings are as follows:
Remote UI On/Off: On
Use TLS: Off
|
1
|
Press [On].
|
2
|
Press [On] for <Use TLS>.
|
3
|
Press [OK].
|
1
|
Press [On].
|
2
|
Press [Off] for <Use TLS>.
|
3
|
Press [OK].
|
1
|
Press [Off] → [OK].
|
IMPORTANT
|
Enabling the Remote UI opens the machine’s http/https port. If the port is left open, an unauthorized user may try to access the machine from the open port. Disabling the Remote UI is recommended if you do not plan to use it.
|
IMPORTANT
|
Setting the Remote UI Access password is recommended to reduce the risk of unauthorized access by outside third parties.
|
|
[On]:
|
General users are required to enter the Password to log in to the Remote UI. Proceed to step 5.
|
[Off]:
|
General users can log in to the Remote UI without entering the Password. Proceed to step 6.
|