NOTE
|
The default setting is ‘Off’.
|
NOTE
|
For more information on selecting a paper source for printing received documents, see Configuring the Machine's Basic Settings.
The default setting for all switches is ‘On’.
|
NOTE
|
The default settings are:
Receive Reduction: ‘On’
RX Reduction: ‘Auto’
Reduce %: ‘90%’
Reduce Direction: ‘Vertical Only’
|
|
[On]:
|
Reduces received documents.
|
[Off]:
|
Does not reduce received documents.
|
1
|
Specify each setting → press [OK].
|
|
[Auto]:
|
The image is automatically reduced by a suitable reduction ratio.
|
[Fix. Red.]:
|
The image is reduced by the reduction ratio set in for <Reduce %>.
|
|
[Ver. Hor.]:
|
The image is reduced in both the vertical and horizontal directions.
|
[Vertical Only]:
|
The image is reduced in the vertical direction only.
|
1
|
Press [OK].
IMPORTANT:
If you press [Off], the received document is not automatically reduced to fit the size of the paper. If the size of the received document exceeds the printable area, the image is divided into equal sections and printed onto separate sheets of paper.
Regardless of the settings you set for <Receive Reduction>, if the area of the image which exceeds the printable area is less than 12 mm, it will not be printed.
|
NOTE
|
The default setting is ‘Off’.
|
NOTE
|
The default setting is ‘Gamma 1.8’.
|
IMPORTANT
|
If you want to receive using ECM, ECM transmission should be set on the recipient’s machine. This setting is ignored unless ECM is set in both machines.
Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.
If there is trouble with the line, it will take more time to receive the documents.
|
NOTE
|
The default setting is ‘On’.
|
|
[On]:
|
Uses ECM.
|
[Off]:
|
Does not use ECM.
|
NOTE
|
The default setting is ‘Off’.
|
|
[On]:
|
Rejects to receive faxes from unknown senders.
|
[Off]:
|
Does not reject to receive faxes from unknown senders.
|