IMPORTANT
|
Changes made to DNS Server settings become effective when the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before You Start Using the Machine,” in the User’s Guide.
|
1
|
Press [Primary DNS Server] → enter the IP address of the DNS server using - (numeric keys).
|
2
|
Press [Secondary DNS Server] → enter the IP address of the DNS server using - (numeric keys).
If you do not want to set up a secondary DNS server, enter <0.0.0.0>.
|
3
|
Press [OK].
|
1
|
Press [Host Name] → enter the name of the machine as the host name → press [OK].
|
2
|
Press [Domain Name] → enter the network domain name of the machine → press [OK].
|
3
|
Press [OK].
|
1
|
Press [Primary DNS Server] → enter the DNS server address → press [OK].
|
2
|
Press [Primary DNS Server] → enter the DNS server address → press [OK].
If you do not want to specify a secondary DNS server, leave [Secondary DNS Server] blank. |
3
|
Press [OK].
|
1
|
Press [On] for <Use Same Host Name/Domain Name as IPv4> → press [OK].
|
1
|
Press [Off] for <Use Same Host Name/Domain Name as IPv4>.
|
2
|
Press [Host Name] → enter the name of the machine as the host name → press [OK].
|
3
|
Press [Domain Name] → enter the network domain name of the machine → press [OK].
|
4
|
Press [OK].
|
1
|
If your environment includes a dynamic DNS server and you want to automatically register the IPv6 address, host name, and domain name set for the machine in the DNS server using dynamic DNS updating, press [On] for <DNS Dynamic Update Settings>.
|
2
|
If you want to register a manual address in the DNS server using dynamic DNS updating, press [On] for <Register Manual Address>. Otherwise, press [Off].
|
3
|
If you want to register a stateful address in the DNS server using dynamic DNS updating, press [On] for <Register Stateful Address>. Otherwise, press [Off].
|
4
|
Press [OK].
|