NOTE
|
The following types of LDAP servers can be used with this machine:
Windows 2000 Server with Active Directory
Windows Server 2003 with Active Directory
Windows Server 2008 with Active Directory
Lotus Notes R5 to R8
For more information, contact your local authorized Canon dealer.
You can register up to five LDAP servers.
|
1
|
Press [Server] → enter a server name → press [OK].
|
2
|
Press [Server Address] → enter the server’s address → press [OK].
NOTE:
If <Login Information> is set to ‘Use (security authent.)’ for the LDAP server and Reverse DNS Lookup (a function that looks up the host name from the IP address) is not supported, enter a host name instead of an IP address.
|
3
|
Press [Location to Start Search] → enter the location to start searching → press [OK].
Enter the location to start searching according to the type of LDAP server you are using, or as described below. You can leave this field blank.
NOTE:
If you are using Windows 2000 Server, Windows Server 2003, or Windows Server 2008 with Active Directory:
Add “DC=” to each dot separated series of characters in the Active Directory domain name, and separate each series of characters by a comma.
Example: If <team1.salesdept.canon.co.jp> is the domain name in Active Directory: DC=team1, DC=salesdept, DC=canon, DC=co, DC=jp
If you are using Lotus Notes Domino R5 or later:
Enter the dn (Distinguished Name) of the node on the directory tree, such as “ou=team1”, “ou=salesdept”, “o=canon”, or “c=jp”.
If the server’s LDAP version is 3, you do not have to specify [Location to Start Search]. (If the LDAP version is 3, the machine automatically retrieves settings from the server, and sets the location to start searching.) If the server’s LDAP version is 2, you have to specify [Location to Start Search].
|
1
|
Select the Server LDAP version and character code → press [OK].
Select the LDAP version and character code according to the LDAP server’s environment. |
1
|
Select the LDAP version and character code according to the LDAP server’s environment → press [Next].
|
2
|
Press [User] → enter the user name according to the type of LDAP server you are using → press [OK].
NOTE:
If you are using Windows 2000 Server, Windows Server 2003, or Windows Server 2008 with Active Directory:
Press [User] → enter “Windows domain name/Windows user name”.
Example: If <team1> is the Windows domain name, and <user1> is the Windows user name: team1/user1
If you are using Lotus Notes Domino R5 or later:
Press [User] → enter the dn (Distinguished Name) of the user, such as “cn=admin”, “ou=team1”, or “ou=salesdept”.
|
3
|
Press [Password] → enter a password → press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the Register screen.
|
4
|
Select [On] or [Off] for <Display authentication screen>.
[On]: When searching for information on the server, a login information dialog box is displayed even if a password is not required.
[Off]: When searching for information on the server, a login information dialog box is not displayed.
|
5
|
Press [OK].
|
1
|
Press [Next].
|
2
|
Press [User] → enter a user name → press [OK].
Example: If <user1 > is the Windows user name:
user1 |
3
|
Press [Password] → enter a password → press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the Register screen.
|
4
|
Press [Domain Name] → enter a domain name → press [OK].
Enter the directory tree name of the Active Directory, such as <team1.salesdept.canon.co.jp>.
|
5
|
Select [On] or [Off] for <Display authentication screen>.
[On]: When searching for information on the server, a login information dialog box is displayed even if a password is not required.
[Off]: When searching for information on the server, a login information dialog box is not displayed.
|
6
|
Press [OK].
NOTE:
If Authorized Send is activated, <Carry Over Send Auth. Info.> appears on the top of the Register screen. Press [On] to use the same user name and password as the login information for Authorized Send or [Off] to use the user name and password registered at this step.
|
1
|
Press [Not Reg’d 1] or [Not Reg’d 2] → [Register/Edit].
|
2
|
Press [Display Name] → enter the name to display → press [OK].
|
3
|
Press [Attribute Name] → enter the attribute name → press [OK].
|
4
|
Press [OK].
|
1
|
Select the search attribute that you want to edit → press [Register/Edit].
|
2
|
Press [Display Name] → edit the name to display → press [OK].
|
3
|
Press [Attribute Name] → edit the attribute name → press [OK].
|
4
|
Press [OK].
|
1
|
Select the search attribute that you want to erase → press [Erase].
|
2
|
Press [Yes].
|