Double Staple Width Adjustment
You can adjust the double staple width.
This mode can be set when the Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1 is attached. (See "Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO/Puncher Unit-BT1" or "Staple Finisher-N1/Booklet Finisher-N1/Puncher Unit-BF1/Puncher Unit-BG1/Inner Booklet Trimmer-A1.")
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Double Staple Width].
3.
Adjust the staple width.
If the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached:
Press [-] or [+] to adjust the staple width.
If the Staple Finisher-N1/Booklet Finisher-N1 is attached:
Select either 120 mm or 145 mm for the staple width.
|
NOTE
|
|
If the width of the paper is less than 257 mm, the Adjust Staple Width mode is automatically set to '120 mm'.
|
4.
Press [OK].