IMPORTANT |
If the [FTP Settings] check box is not selected in the [TCP/IP Settings] page in [Settings/Registration] - [Preferences] - [Network], settings cannot be specified from the FTP client. "Configuring the Protocol Settings" |
NOTE |
Run Command Prompt using the following procedure. If you are using Windows Vista/7/Server 2003/Server 2008From the [Start] menu, select [All Programs] or [Programs] → [Accessories] → [Command Prompt]. If you are using Windows 8/8.1/Server 2012/Server 2012 R2Right-click the lower-left corner of the screen → select [Command Prompt] If you are using Windows 10Right-click [ ] → select [Command Prompt] If you are using UNIXDisplay the console screen. |
If you are not sure about the IP address of the printer Print and confirm Network Status Print while referring to "Checking the Printer Settings and Consumables", or consult your network administrator. |
The default password is "7654321". |
Enter "CONFIG" as all upper case characters. |
→ | The config file is downloaded. The characters entered for <the file name> become the name of the downloaded file. |
If you cannot find the config file Search for the config file using the file search function of your operating system. (The download directory for the config file varies depending on the operating system or settings.) |
Enter "CONFIG" as all upper case characters. |
→ | The edited config file uploads. In <the file name>, enter the name of the config file that was entered when the file was downloaded. |
→ | When the printer is restarted the settings will be enabled. After checking that the printer has restarted, press the [c] key while holding down the [Ctrl] key, and return to the ftp command prompt. |
→ | Command Prompt closes. |